NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Wed Apr 24, 2024 7:05 pm

View unanswered posts | View active topics


Board index » v1.x NASLite M2 » NASLite-M2

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
BDHela
 Post subject: Couple Questions:
PostPosted: Wed Jun 22, 2011 7:24 am 
Offline

Joined: Wed Jun 22, 2011 7:21 am
Posts: 3
1. Anyway to hide the mirror drive from visibility?

2. Anyway to keep the drive numbers the same? They seem to shift when you enable say UPNP, save and reboot, the drives shift from say 0 and 1 to 1 and 3.

Thanks
Top
 Profile  
 
robrub
 Post subject: Re: Couple Questions:
PostPosted: Wed Jun 22, 2011 8:26 am 
Offline

Joined: Sat Jun 02, 2007 2:45 am
Posts: 485
Location: France
1/ No. You have to mount the drive in order to mirror to it and if you mount it, it will be visible on the LAN

2/ I'm not so sure about this. Usually, if you don't change the BIOS and/or change the drives, the drive numbers don't change.

Robby
Top
 Profile  
 
BDHela
 Post subject: Re: Couple Questions:
PostPosted: Fri Jun 24, 2011 1:25 pm 
Offline

Joined: Wed Jun 22, 2011 7:21 am
Posts: 3
Thanks. As an aside the drive letters shift when using USB external drives.
Top
 Profile  
 
robrub
 Post subject: Re: Couple Questions:
PostPosted: Fri Jun 24, 2011 2:45 pm 
Offline

Joined: Sat Jun 02, 2007 2:45 am
Posts: 485
Location: France
BDHela wrote:
the drive letters shift when using USB external drives.
Yes, if you plug and unplug USB drives, the IDE/SATA drive letters will switch (may depend on how the BIOS looks for drives). No way to change that except by NOT unplugging the USB drives ;)
Top
 Profile  
 
BDHela
 Post subject: Re: Couple Questions:
PostPosted: Sun Jun 26, 2011 9:53 pm 
Offline

Joined: Wed Jun 22, 2011 7:21 am
Posts: 3
Thanks. To be honest, I am not unplugging them. If you leave them plugged in, enable UPNP, it changes the drive numbers :-).

No biggie. I ripped them out of the enclosures and put them into the machine. Problemo solved!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » v1.x NASLite M2 » NASLite-M2

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 42 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group