NASLite Network Attached Storage

I have 5 drives (plus the boot drive on a CF card) in my M2 server.
The SMART alarm is going off for I presume immenent drive failure - without pulling individual drives and rebooting, where can I see which drive is the issue?
-there doesn't appear to be anything referencing a particular drive on the log page
-disabling SMART on all drives (and rebooting just in case) has made no difference: the alarm continues
Naslite M2 v1.61

Many thanks for any help - the alarm is driving my missus nuts!

It may be the drive usage alarm that you are hearing. Go to the status page of the server and check the drives.

Mike

Arrgh - am a fool (of a took)!
hadn't realised the disk names under "general storage" on the web server were hyperlinks-showing (amongst other data) the SMART status.


Have found the failing drive and have disconnected until I can get a replacement in.
Thanks for the reply, mikeiver1-usage wasn't an issue in this case.

Would still like to know how to turn the alarm off tho: it was driving the household nuts while diagnosis went on.

Any ideas why disabling SMART on the drive didn't stop the alarm-and what could have?
Many thanks.