NASLite Network Attached Storage

why is this performance so bad? Sys log attached: I have a adaptec 2610sa, with 2 500 G hard drive in RAID 1.

I did a local drive test to compare to the server results:

Local Drive Speed


Server Drive Speed




* Feb 3 16:19:36 [3] klogd started: BusyBox v1.12.1 (2009-11-19 21:21:30 UTC)
* Feb 3 16:19:36 [3] Linux version 2.6.30.3.CORE3 (root@DevBox) (gcc version 4.1.2 (SE 4.1.2 p1.0.2)) #1 Mon Dec 7 01:45:14 UTC 2009
* Feb 3 16:19:36 [2] KERNEL supported cpus:
* Feb 3 16:19:36 [2] Intel GenuineIntel
* Feb 3 16:19:36 [2] AMD AuthenticAMD
* Feb 3 16:19:36 [2] NSC Geode by NSC
* Feb 3 16:19:36 [2] Cyrix CyrixInstead
* Feb 3 16:19:36 [2] Centaur CentaurHauls
* Feb 3 16:19:36 [2] Transmeta GenuineTMx86
* Feb 3 16:19:36 [2] Transmeta TransmetaCPU
* Feb 3 16:19:36 [2] UMC UMC UMC UMC
* Feb 3 16:19:36 [2] BIOS-provided physical RAM map:
* Feb 3 16:19:36 [2] BIOS-e820: 0000000000000000 - 0000000000080000 (usable)
* Feb 3 16:19:36 [2] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
* Feb 3 16:19:36 [2] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
* Feb 3 16:19:36 [2] BIOS-e820: 0000000000100000 - 000000003dfec000 (usable)
* Feb 3 16:19:36 [2] BIOS-e820: 000000003dfec000 - 000000003dfef000 (ACPI data)
* Feb 3 16:19:36 [2] BIOS-e820: 000000003dfef000 - 000000003dfff000 (reserved)
* Feb 3 16:19:36 [2] BIOS-e820: 000000003dfff000 - 000000003e000000 (ACPI NVS)
* Feb 3 16:19:36 [2] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
* Feb 3 16:19:36 [2] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
* Feb 3 16:19:36 [2] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
* Feb 3 16:19:36 [2] DMI 2.3 present.
* Feb 3 16:19:36 [2] last_pfn = 0x3dfec max_arch_pfn = 0x100000
* Feb 3 16:19:36 [2] init_memory_mapping: 0000000000000000-00000000377fe000
* Feb 3 16:19:36 [1] 0000000000 - 0000400000 page 4k
* Feb 3 16:19:36 [1] 0000400000 - 0037400000 page 2M
* Feb 3 16:19:36 [1] 0037400000 - 00377fe000 page 4k
* Feb 3 16:19:36 [1] kernel direct mapping tables up to 377fe000 @ 7000-c000
* Feb 3 16:19:36 [2] RAMDISK: 3d75a000 - 3dfcaa45
* Feb 3 16:19:36 [2] Allocated new RAMDISK: 0039f000 - 00c0fa45
* Feb 3 16:19:36 [2] Move RAMDISK from 000000003d75a000 - 000000003dfcaa44 to 0039f000 - 00c0fa44
* Feb 3 16:19:36 [4] ACPI: RSDP 000f85e0 00014 (v00 ASUS )
* Feb 3 16:19:36 [4] ACPI: RSDT 3dfec000 00030 (v01 ASUS A7N266VX 42302E31 MSFT 31313031)
* Feb 3 16:19:36 [4] ACPI: FACP 3dfec100 00074 (v01 ASUS A7N266VX 42302E31 MSFT 31313031)
* Feb 3 16:19:36 [4] ACPI: DSDT 3dfec180 0263C (v01 ASUS A7N266VX 00001000 MSFT 0100000B)
* Feb 3 16:19:36 [4] ACPI: FACS 3dfff000 00040
* Feb 3 16:19:36 [4] ACPI: BOOT 3dfec040 00028 (v01 ASUS A7N266VX 42302E31 MSFT 31313031)
* Feb 3 16:19:36 [4] ACPI: APIC 3dfec080 0005A (v01 ASUS A7N266VX 42302E31 MSFT 31313031)
* Feb 3 16:19:36 [1] ACPI: Local APIC address 0xfee00000
* Feb 3 16:19:36 [3] 103MB HIGHMEM available.
* Feb 3 16:19:36 [3] 887MB LOWMEM available.
* Feb 3 16:19:36 [2] mapped low ram: 0 - 377fe000
* Feb 3 16:19:36 [2] low ram: 0 - 377fe000
* Feb 3 16:19:36 [2] node 0 low ram: 00000000 - 377fe000
* Feb 3 16:19:36 [2] node 0 bootmap 00008000 - 0000ef00
* Feb 3 16:19:36 [2] (7 early reservations) ==> bootmem [0000000000 - 00377fe000]
* Feb 3 16:19:36 [2] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
* Feb 3 16:19:36 [2] #1 [0000100000 - 000039b83c] TEXT DATA BSS ==> [0000100000 - 000039b83c]
* Feb 3 16:19:36 [2] #2 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
* Feb 3 16:19:36 [2] #3 [000039c000 - 000039e15c] BRK ==> [000039c000 - 000039e15c]
* Feb 3 16:19:36 [2] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
* Feb 3 16:19:36 [2] #5 [000039f000 - 0000c0fa45] NEW RAMDISK ==> [000039f000 - 0000c0fa45]
* Feb 3 16:19:36 [2] #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
* Feb 3 16:19:36 [4] Zone PFN ranges:
* Feb 3 16:19:36 [4] DMA 0x00000000 -> 0x00001000
* Feb 3 16:19:36 [4] Normal 0x00001000 -> 0x000377fe
* Feb 3 16:19:36 [4] HighMem 0x000377fe -> 0x0003dfec
* Feb 3 16:19:36 [4] Movable zone start PFN for each node
* Feb 3 16:19:36 [4] early_node_map[2] active PFN ranges
* Feb 3 16:19:36 [4] 0: 0x00000000 -> 0x00000080
* Feb 3 16:19:36 [4] 0: 0x00000100 -> 0x0003dfec
* Feb 3 16:19:36 [1] On node 0 totalpages: 253804
* Feb 3 16:19:36 [1] free_area_init_node: node 0, pgdat c031c560, node_mem_map c1000000
* Feb 3 16:19:36 [1] DMA zone: 32 pages used for memmap
* Feb 3 16:19:36 [1] DMA zone: 0 pages reserved
* Feb 3 16:19:36 [1] DMA zone: 3936 pages, LIFO batch:0
* Feb 3 16:19:36 [1] Normal zone: 1744 pages used for memmap
* Feb 3 16:19:36 [1] Normal zone: 221486 pages, LIFO batch:31
* Feb 3 16:19:36 [1] HighMem zone: 208 pages used for memmap
* Feb 3 16:19:36 [1] HighMem zone: 26398 pages, LIFO batch:7
* Feb 3 16:19:36 [2] Using APIC driver default
* Feb 3 16:19:36 [2] Nvidia board detected. Ignoring ACPI timer override.
* Feb 3 16:19:36 [2] If you got timer trouble try acpi_use_timer_override
* Feb 3 16:19:36 [2] ACPI: PM-Timer IO Port: 0xe408
* Feb 3 16:19:36 [1] ACPI: Local APIC address 0xfee00000
* Feb 3 16:19:36 [2] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
* Feb 3 16:19:36 [2] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
* Feb 3 16:19:36 [2] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
* Feb 3 16:19:36 [2] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
* Feb 3 16:19:36 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
* Feb 3 16:19:36 [4] ACPI: BIOS IRQ0 pin2 override ignored.
* Feb 3 16:19:36 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
* Feb 3 16:19:36 [1] ACPI: IRQ9 used by override.
* Feb 3 16:19:36 [2] Enabling APIC mode:
* Feb 3 16:19:36 [2] Flat. Using 1 I/O APICs
* Feb 3 16:19:36 [2] Using ACPI (MADT) for SMP configuration information
* Feb 3 16:19:36 [1] nr_irqs_gsi: 24
* Feb 3 16:19:36 [2] Allocating PCI resources starting at 40000000 (gap: 3e000000:c0c00000)
* Feb 3 16:19:36 [4] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251820
* Feb 3 16:19:36 [3] Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
* Feb 3 16:19:36 [2] Enabling fast FPU save and restore. done.
* Feb 3 16:19:36 [2] Enabling unmasked SIMD FPU exception support. done.
* Feb 3 16:19:36 [2] Initializing CPU#0
* Feb 3 16:19:36 [2] NR_IRQS:288
* Feb 3 16:19:36 [4] PID hash table entries: 4096 (order: 12, 16384 bytes)
* Feb 3 16:19:36 [4] Fast TSC calibration using PIT
* Feb 3 16:19:36 [4] Detected 1994.891 MHz processor.
* Feb 3 16:19:36 [4] Console: colour VGA+ 80x25
* Feb 3 16:19:36 [2] console [tty0] enabled
* Feb 3 16:19:36 [2] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
* Feb 3 16:19:36 [2] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
* Feb 3 16:19:36 [2] Initializing HighMem for node 0 (000377fe:0003dfec)
* Feb 3 16:19:36 [2] Memory: 994760k/1015728k available (1521k kernel code, 20072k reserved, 666k data, 208k init, 106424k highmem)
* Feb 3 16:19:36 [2] virtual kernel memory layout:
* Feb 3 16:19:36 [2] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
* Feb 3 16:19:36 [2] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
* Feb 3 16:19:36 [2] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
* Feb 3 16:19:36 [2] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
* Feb 3 16:19:36 [2] .init : 0xc0326000 - 0xc035a000 ( 208 kB)
* Feb 3 16:19:36 [2] .data : 0xc027c55b - 0xc0322e14 ( 666 kB)
* Feb 3 16:19:36 [2] .text : 0xc0100000 - 0xc027c55b (1521 kB)
* Feb 3 16:19:36 [2] Checking if this processor honours the WP bit even in supervisor mode.Ok.
* Feb 3 16:19:36 [2] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
* Feb 3 16:19:36 [2] Calibrating delay loop (skipped), value calculated using timer frequency 3989.78 BogoMIPS (lpj=7979564)
* Feb 3 16:19:36 [4] Mount-cache hash table entries: 512
* Feb 3 16:19:36 [4] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
* Feb 3 16:19:36 [2] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
* Feb 3 16:19:36 [2] CPU: L2 Cache: 256K (64 bytes/line)
* Feb 3 16:19:36 [4] CPU: AMD Athlon(tm) Processor stepping 01
* Feb 3 16:19:36 [2] Checking 'hlt' instruction. OK.
* Feb 3 16:19:36 [2] ACPI: Core revision 20090320
* Feb 3 16:19:36 [2] net_namespace: 296 bytes
* Feb 3 16:19:36 [2] NET: Registered protocol family 16
* Feb 3 16:19:36 [2] ACPI: bus type pci registered
* Feb 3 16:19:36 [2] PCI: PCI BIOS revision 2.10 entry at 0xf1be0, last bus=2
* Feb 3 16:19:36 [2] PCI: Using configuration type 1 for base access
* Feb 3 16:19:36 [4] bio: create slab at 0
* Feb 3 16:19:36 [1] ACPI: EC: Look up EC in DSDT
* Feb 3 16:19:36 [2] ACPI: Interpreter enabled
* Feb 3 16:19:36 [2] ACPI: (supports S0 S5)
* Feb 3 16:19:36 [2] ACPI: Using IOAPIC for interrupt routing
* Feb 3 16:19:36 [2] ACPI: No dock devices found.
* Feb 3 16:19:36 [2] ACPI: PCI Root Bridge [PCI0] (0000:00)
* Feb 3 16:19:36 [1] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
* Feb 3 16:19:36 [1] pci 0000:00:01.1: reg 10 io port: [0x5000-0x500f]
* Feb 3 16:19:36 [1] pci 0000:00:01.1: reg 14 io port: [0x5500-0x550f]
* Feb 3 16:19:36 [1] pci 0000:00:01.1: reg 18 io port: [0x5100-0x511f]
* Feb 3 16:19:36 [2] pci 0000:00:01.1: PME# supported from D3hot D3cold
* Feb 3 16:19:36 [2] pci 0000:00:01.1: PME# disabled
* Feb 3 16:19:36 [1] pci 0000:00:06.0: reg 10 io port: [0xe100-0xe1ff]
* Feb 3 16:19:36 [1] pci 0000:00:06.0: reg 14 io port: [0xe000-0xe07f]
* Feb 3 16:19:36 [1] pci 0000:00:06.0: reg 18 32bit mmio: [0xe6800000-0xe6800fff]
* Feb 3 16:19:36 [1] pci 0000:00:06.0: supports D1 D2
* Feb 3 16:19:36 [1] pci 0000:00:06.1: reg 10 io port: [0xe300-0xe3ff]
* Feb 3 16:19:36 [1] pci 0000:00:06.1: reg 14 io port: [0xe200-0xe27f]
* Feb 3 16:19:36 [1] pci 0000:00:06.1: reg 18 32bit mmio: [0xe6000000-0xe6000fff]
* Feb 3 16:19:36 [2] pci 0000:00:06.1: PME# supported from D3cold
* Feb 3 16:19:36 [2] pci 0000:00:06.1: PME# disabled
* Feb 3 16:19:36 [1] pci 0000:00:09.0: reg 20 io port: [0x9800-0x980f]
* Feb 3 16:19:36 [1] pci 0000:01:06.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff]
* Feb 3 16:19:36 [1] pci 0000:01:06.0: reg 30 32bit mmio: [0x000000-0x007fff]
* Feb 3 16:19:36 [1] pci 0000:01:09.0: reg 10 32bit mmio: [0xe5800000-0xe5800fff]
* Feb 3 16:19:36 [1] pci 0000:01:09.0: supports D1 D2
* Feb 3 16:19:36 [2] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold
* Feb 3 16:19:36 [2] pci 0000:01:09.0: PME# disabled
* Feb 3 16:19:36 [1] pci 0000:01:0a.0: reg 10 32bit mmio: [0xe5000000-0xe5000fff]
* Feb 3 16:19:36 [1] pci 0000:01:0a.0: supports D1 D2
* Feb 3 16:19:36 [2] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
* Feb 3 16:19:36 [2] pci 0000:01:0a.0: PME# disabled
* Feb 3 16:19:36 [1] pci 0000:01:0a.1: reg 10 32bit mmio: [0xe4800000-0xe4800fff]
* Feb 3 16:19:36 [1] pci 0000:01:0a.1: supports D1 D2
* Feb 3 16:19:36 [2] pci 0000:01:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
* Feb 3 16:19:36 [2] pci 0000:01:0a.1: PME# disabled
* Feb 3 16:19:36 [1] pci 0000:01:0a.2: reg 10 32bit mmio: [0xe4000000-0xe40000ff]
* Feb 3 16:19:36 [1] pci 0000:01:0a.2: supports D1 D2
* Feb 3 16:19:36 [2] pci 0000:01:0a.2: PME# supported from D0 D1 D2
* Feb 3 16:19:36 [2] D3hot D3cold
* Feb 3 16:19:36 [2] pci 0000:01:0a.2: PME# disabled
* Feb 3 16:19:36 [1] pci 0000:01:0b.0: reg 10 io port: [0xa800-0xa8ff]
* Feb 3 16:19:36 [1] pci 0000:01:0b.0: reg 14 32bit mmio: [0xe3800000-0xe38000ff]
* Feb 3 16:19:36 [1] pci 0000:01:0b.0: supports D1 D2
* Feb 3 16:19:36 [2] pci 0000:01:0b.0: PME# supported from D1 D2 D3hot D3cold
* Feb 3 16:19:36 [2] pci 0000:01:0b.0: PME# disabled
* Feb 3 16:19:36 [1] pci 0000:00:08.0: bridge io port: [0xa000-0xafff]
* Feb 3 16:19:36 [1] pci 0000:00:08.0: bridge 32bit mmio: [0xe3800000-0xe5ffffff]
* Feb 3 16:19:36 [1] pci 0000:00:08.0: bridge 32bit mmio pref: [0xf3f00000-0xf7ffffff]
* Feb 3 16:19:36 [1] pci 0000:02:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
* Feb 3 16:19:36 [1] pci 0000:02:00.0: reg 14 32bit mmio: [0xe8000000-0xefffffff]
* Feb 3 16:19:36 [1] pci 0000:02:00.0: reg 30 32bit mmio: [0xe7ff0000-0xe7ffffff]
* Feb 3 16:19:36 [1] pci 0000:00:1e.0: bridge 32bit mmio: [0xe2000000-0xe37fffff]
* Feb 3 16:19:36 [1] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe7f00000-0xf3efffff]
* Feb 3 16:19:36 [1] pci_bus 0000:00: on NUMA node 0
* Feb 3 16:19:36 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
* Feb 3 16:19:36 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
* Feb 3 16:19:36 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 18) *3
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 18) *4
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 18) *3
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 18) *3
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKE] (IRQs 19) *11
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKF] (IRQs 20 21 22) *3
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKU] (IRQs 20 21 22) *10
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKI] (IRQs 20 21 22) *3
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKJ] (IRQs 20 21 22) *0, disabled.
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKK] (IRQs 20 21 22) *11
* Feb 3 16:19:36 [2] ACPI: PCI Interrupt Link [LNKM] (IRQs 20 21 22) *3
* Feb 3 16:19:36 [2] PCI: Using ACPI for IRQ routing
* Feb 3 16:19:36 [1]
* Feb 3 16:19:36 [1] printing PIC contents
* Feb 3 16:19:36 [1] . PIC IMR: ffff
* Feb 3 16:19:36 [1] . PIC IRR: 0c18
* Feb 3 16:19:36 [1] . PIC ISR: 0000
* Feb 3 16:19:36 [1] . PIC ELCR: 0c18
* Feb 3 16:19:36 [4]
* Feb 3 16:19:36 [1] printing local APIC contents on CPU#0/0:
* Feb 3 16:19:36 [2] . APIC ID: 00000000 (0)
* Feb 3 16:19:36 [2] . APIC VERSION: 00040010
* Feb 3 16:19:36 [1] . APIC TASKPRI: 00000000 (00)
* Feb 3 16:19:36 [1] . APIC ARBPRI: 00000000 (00)
* Feb 3 16:19:36 [1] . APIC PROCPRI: 00000000
* Feb 3 16:19:36 [1] . APIC LDR: 01000000
* Feb 3 16:19:36 [1] . APIC DFR: ffffffff
* Feb 3 16:19:36 [1] . APIC SPIV: 000001ff
* Feb 3 16:19:36 [1] . APIC ISR field:
* Feb 3 16:19:36 [1] 0123456789abcdef0123456789abcdef
* Feb 3 16:19:36 [1] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [1] . APIC TMR field:
* Feb 3 16:19:36 [1] 0123456789abcdef0123456789abcdef
* Feb 3 16:19:36 [1] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [1] . APIC IRR field:
* Feb 3 16:19:36 [1] 0123456789abcdef0123456789abcdef
* Feb 3 16:19:36 [1] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [4] 00000000000000000000000000000000
* Feb 3 16:19:36 [1] . APIC ESR: 00000000
* Feb 3 16:19:36 [1] . APIC ICR: 00000000
* Feb 3 16:19:36 [1] . APIC ICR2: 00000000
* Feb 3 16:19:36 [1] . APIC LVTT: 000200ef
* Feb 3 16:19:36 [1] . APIC LVTPC: 00010000
* Feb 3 16:19:36 [1] . APIC LVT0: 00010700
* Feb 3 16:19:36 [1] . APIC LVT1: 00000400
* Feb 3 16:19:36 [1] . APIC LVTERR: 000000fe
* Feb 3 16:19:36 [1] . APIC TMICT: 000103c2
* Feb 3 16:19:36 [1] . APIC TMCCT: 0000f44a
* Feb 3 16:19:36 [1] . APIC TDCR: 00000003
* Feb 3 16:19:36 [4]
* Feb 3 16:19:36 [1] number of MP IRQ sources: 16.
* Feb 3 16:19:36 [1] number of IO-APIC #2 registers: 24.
* Feb 3 16:19:36 [2] testing the IO APIC.
* Feb 3 16:19:36 [4]
* Feb 3 16:19:36 [1] IO APIC #2
* Feb 3 16:19:36 [1] register #00: 00000000
* Feb 3 16:19:36 [1] . : physical APIC id: 00
* Feb 3 16:19:36 [1] . : Delivery Type: 0
* Feb 3 16:19:36 [1] . : LTS : 0
* Feb 3 16:19:36 [1] register #01: 00170011
* Feb 3 16:19:36 [1] . : max redirection entries: 0017
* Feb 3 16:19:36 [1] . : PRQ implemented: 0
* Feb 3 16:19:36 [1] . : IO APIC version: 0011
* Feb 3 16:19:36 [1] register #02: 00000000
* Feb 3 16:19:36 [1] . : arbitration: 00
* Feb 3 16:19:36 [1] IRQ redirection table:
* Feb 3 16:19:36 [1] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
* Feb 3 16:19:36 [1] 00 001 0 0 0 0 0 1 1 30
* Feb 3 16:19:36 [1] 01 001 0 0 0 0 0 1 1 31
* Feb 3 16:19:36 [1] 02 000 1 0 0 0 0
* Feb 3 16:19:36 [2] 0 0 00
* Feb 3 16:19:36 [1] 03 001 1 0 0 0 0 1 1 33
* Feb 3 16:19:36 [1] 04 001 1 0 0 0 0 1 1 34
* Feb 3 16:19:36 [1] 05 001 0 0 0 0 0 1 1 35
* Feb 3 16:19:36 [1] 06 001 0 0 0 0 0 1 1 36
* Feb 3 16:19:36 [1] 07 001 0 0 0 0 0 1 1 37
* Feb 3 16:19:36 [1] 08 001 0 0 0 0 0 1 1 38
* Feb 3 16:19:36 [1] 09 001 0 1 0 0 0 1 1 39
* Feb 3 16:19:36 [1] 0a 001 1 0 0 0 0 1 1 3A
* Feb 3 16:19:36 [1] 0b 001 1 0 0 0 0 1 1 3B
* Feb 3 16:19:36 [1] 0c 001 0 0 0 0 0 1 1 3C
* Feb 3 16:19:36 [1] 0d 001 0 0 0 0 0 1 1 3D
* Feb 3 16:19:36 [1] 0e 001 0 0 0 0 0 1 1 3E
* Feb 3 16:19:36 [1] 0f 001 0 0 0 0 0 1 1 3F
* Feb 3 16:19:36 [1] 10 000 1 0 0 0 0 0 0 00
* Feb 3 16:19:36 [1] 11 000 1 0 0 0 0 0 0 00
* Feb 3 16:19:36 [1] 12 000 1 0 0 0 0 0 0 00
* Feb 3 16:19:36 [1] 13 000 1 0 0 0 0 0 0 00
* Feb 3 16:19:36 [1] 14 000 1 0 0 0 0 0 0 00
* Feb 3 16:19:36 [1] 15 000 1 0 0 0 0 0 0 00
* Feb 3 16:19:36 [1] 16 000 1 0 0 0 0 0 0 00
* Feb 3 16:19:36 [1] 17 000 1 0 0 0 0 0 0 00
* Feb 3 16:19:36 [1] IRQ to pin mappings:
* Feb 3 16:19:36 [1] IRQ0 -> 0:0
* Feb 3 16:19:36 [1] IRQ1 -> 0:1
* Feb 3 16:19:36 [1] IRQ2 -> 0:2
* Feb 3 16:19:36 [1] IRQ3 -> 0:3
* Feb 3 16:19:36 [1] IRQ4 -> 0:4
* Feb 3 16:19:36 [1] IRQ5 -> 0:5
* Feb 3 16:19:36 [1] IRQ6 -> 0:6
* Feb 3 16:19:36 [1] IRQ7 -> 0:7
* Feb 3 16:19:36 [1] IRQ8 -> 0:8
* Feb 3 16:19:36 [1] IRQ9 -> 0:9
* Feb 3 16:19:36 [1] IRQ10 -> 0:10
* Feb 3 16:19:36 [1] IRQ11 -> 0:11
* Feb 3 16:19:36 [1] IRQ12 -> 0:12
* Feb 3 16:19:36 [1] IRQ13 -> 0:13
* Feb 3 16:19:36 [1] IRQ14 -> 0:14
* Feb 3 16:19:36 [1] IRQ15 -> 0:15
* Feb 3 16:19:36 [2] done.
* Feb 3 16:19:36 [2] pnp: PnP ACPI init
* Feb 3 16:19:36 [2] ACPI: bus type pnp registered
* Feb 3 16:19:36 [2] pnp: PnP ACPI: found 15 devices
* Feb 3 16:19:36 [2] ACPI: ACPI bus type pnp unregistered
* Feb 3 16:19:36 [2] system 00:00: iomem range 0x0-0x9ffff could not be reserved
* Feb 3 16:19:36 [2] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
* Feb 3 16:19:36 [2] system 00:00: iomem range 0x100000-0x3dffffff could not be reserved
* Feb 3 16:19:36 [2] system 00:00: iomem range 0xfec00000-0xfec000ff has been reserved
* Feb 3 16:19:36 [2] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
* Feb 3 16:19:36 [2] system 00:02: ioport range 0xe400-0xe4fe has been reserved
* Feb 3 16:19:36 [2] system 00:02: ioport range 0xe4ff-0xe4ff has been reserved
* Feb 3 16:19:36 [2] system 00:02: ioport range 0xcf0-0xcf3 has been reserved
* Feb 3 16:19:36 [2] system 00:02: iomem range 0xffc00000-0xffffffff could not be reserved
* Feb 3 16:19:36 [2] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
* Feb 3 16:19:36 [2] system 00:0d: ioport range 0x295-0x296 has been reserved
* Feb 3 16:19:36 [2] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
* Feb 3 16:19:36 [2] pci 0000:00:08.0: IO window: 0xa000-0xafff
* Feb 3 16:19:36 [2] pci 0000:00:08.0: MEM window: 0xe3800000-0xe5ffffff
* Feb 3 16:19:36 [2] pci 0000:00:08.0: PREFETCH window: 0x000000f3f00000-0x000000f7ffffff
* Feb 3 16:19:36 [2] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
* Feb 3 16:19:36 [2] pci 0000:00:1e.0: IO window: disabled
* Feb 3 16:19:36 [2] pci 0000:00:1e.0: MEM window: 0xe2000000-0xe37fffff
* Feb 3 16:19:36 [2] pci 0000:00:1e.0: PREFETCH window: 0x000000e7f00000-0x000000f3efffff
* Feb 3 16:19:36 [1] pci 0000:00:08.0: setting latency timer to 64
* Feb 3 16:19:36 [1] pci 0000:00:1e.0: setting latency timer to 64
* Feb 3 16:19:36 [1] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
* Feb 3 16:19:36 [1] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
* Feb 3 16:19:36 [1] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
* Feb 3 16:19:36 [1] pci_bus 0000:01: resource 1 mem: [0xe3800000-0xe5ffffff]
* Feb 3 16:19:36 [1] pci_bus 0000:01: resource 2 pref mem [0xf3f00000-0xf7ffffff]
* Feb 3 16:19:36 [1] pci_bus 0000:02: resource 1 mem: [0xe2000000-0xe37fffff]
* Feb 3 16:19:36 [1] pci_bus 0000:02: resource 2 pref mem [0xe7f00000-0xf3efffff]
* Feb 3 16:19:36 [2] NET: Registered protocol family 2
* Feb 3 16:19:36 [2] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
* Feb 3 16:19:36 [2] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
* Feb 3 16:19:36 [2] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
* Feb 3 16:19:36 [2] TCP: Hash tables configured (established 131072 bind 65536)
* Feb 3 16:19:36 [2] TCP reno registered
* Feb 3 16:19:36 [2] NET: Registered protocol family 1
* Feb 3 16:19:36 [2] Trying to unpack rootfs image as initramfs.
* Feb 3 16:19:36 [2] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
* Feb 3 16:19:36 [2] Freeing initrd memory: 8642k freed
* Feb 3 16:19:36 [2] Simple Boot Flag at 0x3f set to 0x1
* Feb 3 16:19:36 [4] highmem bounce pool size: 64 pages
* Feb 3 16:19:36 [2] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
* Feb 3 16:19:36 [2] msgmni has been set to 1752
* Feb 3 16:19:36 [2] io scheduler noop registered (default)
* Feb 3 16:19:36 [1] pci 0000:02:00.0: Boot video device
* Feb 3 16:19:36 [2] brd: module loaded
* Feb 3 16:19:36 [2] loop: module loaded
* Feb 3 16:19:36 [2] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
* Feb 3 16:19:36 [2] serio: i8042 KBD port at 0x60,0x64 irq 1
* Feb 3 16:19:36 [2] serio:
* Feb 3 16:19:36 [2] i8042 AUX port at 0x60,0x64 irq 12
* Feb 3 16:19:36 [2] mice: PS/2 mouse device common for all mice
* Feb 3 16:19:36 [2] cpuidle: using governor ladder
* Feb 3 16:19:36 [2] TCP cubic registered
* Feb 3 16:19:36 [2] RPC: Registered udp transport module.
* Feb 3 16:19:36 [2] RPC: Registered tcp transport module.
* Feb 3 16:19:36 [2] Using IPI Shortcut mode
* Feb 3 16:19:36 [2] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
* Feb 3 16:19:36 [3] RAMDISK: CORE3 root image found at block 0
* Feb 3 16:19:36 [4] VFS: Mounted root (ext2 filesystem) on device 1:0.
* Feb 3 16:19:36 [2] Freeing unused kernel memory: 208k freed
* Feb 3 16:19:36 [2] Floppy drive(s): fd0 is 1.44M
* Feb 3 16:19:36 [4] DOR0=4
* Feb 3 16:19:36 [4] floppy interrupt on bizarre fdc 1
* Feb 3 16:19:36 [4] handler=(null)
* Feb 3 16:19:36 [2] FDC 0 is a post-1991 82077
* Feb 3 16:19:37 [2] rtc_cmos 00:06: RTC can wake from S4
* Feb 3 16:19:37 [2] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
* Feb 3 16:19:37 [2] rtc0: alarms up to one year, y3k, 242 bytes nvram
* Feb 3 16:19:38 [2] input: PC Speaker as /devices/platform/pcspkr/input/input1
* Feb 3 16:19:38 [2] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
* Feb 3 16:19:38 [2] ACPI: Power Button [PWRF]
* Feb 3 16:19:38 [2] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
* Feb 3 16:19:38 [2] ACPI: Power Button [PWRB]
* Feb 3 16:19:38 [2] processor ACPI_CPU:00: registered as cooling_device0
* Feb 3 16:19:38 [3] SCSI subsystem initialized
* Feb 3 16:19:38 [2] Adaptec aacraid driver 1.1-5[2461]-ms
* Feb 3 16:19:38 [4] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
* Feb 3 16:19:38 [2] aacraid 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, high) -> IRQ 18
* Feb 3 16:19:38 [4] IRQ 18/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs
* Feb 3 16:19:39 [2] AAC0: kernel 4.2-1[7368] Mar 30 2005
* Feb 3 16:19:39 [2] AAC0: monitor 4.2-1[7368]
* Feb 3 16:19:39 [2] AAC0: bios 4.2-1[7368]
* Feb 3 16:19:39 [2] AAC0: serial C17878
* Feb 3 16:19:39 [2] scsi0 : aacraid
* Feb 3 16:19:39 [3] scsi 0:0:0:0: Direct-Access Adaptec 500G RAID1 V1.0 PQ: 0 ANSI: 2
* Feb 3 16:19:39 [3] scsi 0:1:0:0: Direct-Access ST350041 8AS CC37 PQ: 0 ANSI: 2
* Feb 3 16:19:39 [3] scsi 0:1:1:0: Direct-Access WDC WD6400AACS-00G8B 05.0 PQ: 0 ANSI: 2
* Feb 3 16:19:39 [4] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16
* Feb 3 16:19:39 [2] ohci1394 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, high) -> IRQ 16
* Feb 3 16:19:39 [2] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[e5800000-e58007ff] Max Packet=[2048] IR/IT contexts=[4/4]
* Feb 3 16:19:39 [2] usbcore: registered new interface driver usbfs
* Feb 3 16:19:39 [2] usbcore: registered new interface driver hub
* Feb 3 16:19:39 [2] usbcore: registered new device driver usb
* Feb 3 16:19:39 [2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
* Feb 3 16:19:39 [2] ohci_hcd 0000:01:0a.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, high) -> IRQ 18
* Feb 3 16:19:39 [2] ohci_hcd 0000:01:0a.0: OHCI Host Controller
* Feb 3 16:19:39 [2] ohci_hcd 0000:01:0a.0: new USB bus registered, assigned bus number 1
* Feb 3 16:19:39 [2] ohci_hcd 0000:01:0a.0: irq 18, io mem 0xe5000000
* Feb 3 16:19:39 [2] usb usb1: configuration #1 chosen from 1 choice
* Feb 3 16:19:39 [2] hub 1-0:1.0: USB hub found
* Feb 3 16:19:39 [2] hub 1-0:1.0: 3 ports detected
* Feb 3 16:19:39 [2] ohci_hcd 0000:01:0a.1: PCI INT B -> Link[LNKB] -> GSI 16 (level, high) -> IRQ 16
* Feb 3 16:19:39 [2] ohci_hcd 0000:01:0a.1: OHCI Host Controller
* Feb 3 16:19:39 [2] ohci_hcd 0000:01:0a.1: new USB bus registered, assigned bus number 2
* Feb 3 16:19:39 [2] ohci_hcd 0000:01:0a.1: irq 16, io mem 0xe4800000
* Feb 3 16:19:40 [2] usb usb2: configuration #1 chosen from 1 choice
* Feb 3 16:19:40 [2] hub 2-0:1.0: USB hub found
* Feb 3 16:19:40 [2] hub 2-0:1.0: 2 ports detected
* Feb 3 16:19:40 [2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
* Feb 3 16:19:40 [4] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
* Feb 3 16:19:40 [4] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
* Feb 3 16:19:40 [2] ehci_hcd 0000:01:0a.2: PCI INT C -> Link[LNKC] -> GSI 18 (level, high) -> IRQ 18
* Feb 3 16:19:40 [2] ehci_hcd 0000:01:0a.2: EHCI Host Controller
* Feb 3 16:19:40 [2] ehci_hcd 0000:01:0a.2: new USB bus registered, assigned bus number 3
* Feb 3 16:19:40 [2] ehci_hcd 0000:01:0a.2: irq 18, io mem 0xe4000000
* Feb 3 16:19:40 [2] ehci_hcd 0000:01:0a.2: USB 2.0 started, EHCI 0.95
* Feb 3 16:19:40 [2] usb usb3: configuration #1 chosen from 1 choice
* Feb 3 16:19:40 [2] hub 3-0:1.0: USB hub found
* Feb 3 16:19:40 [2] hub 3-0:1.0: 5 ports detected
* Feb 3 16:19:40 [2] 8139too Fast Ethernet driver 0.9.28
* Feb 3 16:19:40 [4] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16
* Feb 3 16:19:40 [2] 8139too 0000:01:0b.0: PCI INT A -> Link[LNKD] -> GSI 16 (level, high) -> IRQ 16
* Feb 3 16:19:40 [2] eth0: RealTek RTL8139 at 0xa800, 00:e0:18:ae:4b:f7, IRQ 16
* Feb 3 16:19:40 [1] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
* Feb 3 16:19:40 [2] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
* Feb 3 16:19:40 [2] Uniform Multi-Platform E-IDE driver
* Feb 3 16:19:40 [2] amd74xx 0000:00:09.0: UDMA100 controller
* Feb 3 16:19:40 [2] amd74xx 0000:00:09.0: IDE controller (0x10de:0x01bc rev 0xc3)
* Feb 3 16:19:40 [4] amd74xx 0000:00:09.0: BIOS didn't set cable bits correctly. Enabling workaround.
* Feb 3 16:19:40 [2] amd74xx 0000:00:09.0: not 100% native mode: will probe irqs later
* Feb 3 16:19:40 [2] ide0: BM-DMA at 0x9800-0x9807
* Feb 3 16:19:40 [2] ide1: BM-DMA at 0x9808-0x980f
* Feb 3 16:19:40 [1] Probing IDE interface ide0.
* Feb 3 16:19:40 [1] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030135732a]
* Feb 3 16:19:40 [2] hda: MAXTOR 6L040L2, ATA DISK drive
* Feb 3 16:19:40 [2] usb 3-1: new high speed USB device using ehci_hcd and address 2
* Feb 3 16:19:40 [2] usb 3-1: configuration #1 chosen from 1 choice
* Feb 3 16:19:41 [2] usb 3-5: new high speed USB device using ehci_hcd and address 3
* Feb 3 16:19:41 [2] usb 3-5: configuration #1 chosen from 1 choice
* Feb 3 16:19:41 [1] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
* Feb 3 16:19:41 [2] hda: UDMA/100 mode selected
* Feb 3 16:19:41 [1] Probing IDE interface ide1.
* Feb 3 16:19:42 [2] hdc: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
* Feb 3 16:19:42 [1] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
* Feb 3 16:19:42 [2] hdc: MWDMA2 mode selected
* Feb 3 16:19:42 [2] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
* Feb 3 16:19:42 [2] ide1 at 0x170-0x177,0x376 on irq 15
* Feb 3 16:19:42 [1] libata version 3.00 loaded.
* Feb 3 16:19:43 [4] Driver 'sd' needs updating - please use bus_type methods
* Feb 3 16:19:43 [3] sd 0:0:0:0: [sda] 976705536 512-byte hardware sectors: (500 GB/465 GiB)
* Feb 3 16:19:43 [3] sd 0:0:0:0: [sda] Write Protect is off
* Feb 3 16:19:43 [1] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
* Feb 3 16:19:43 [3] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
* Feb 3 16:19:43 [2] sda:
* Feb 3 16:19:43 [2] sda1
* Feb 3 16:19:43 [3] sd 0:0:0:0: [sda] Attached SCSI removable disk
* Feb 3 16:19:43 [2] Initializing USB Mass Storage driver.
* Feb 3 16:19:43 [2] scsi1 : SCSI emulation for USB Mass Storage devices
* Feb 3 16:19:43 [1] usb-storage: device found at 2
* Feb 3 16:19:43 [1] usb-storage: waiting for device to settle before scanning
* Feb 3 16:19:43 [2] scsi2 : SCSI emulation for USB Mass Storage devices
* Feb 3 16:19:43 [1] usb-storage: device found at 3
* Feb 3 16:19:43 [1] usb-storage: waiting for device to settle before scanning
* Feb 3 16:19:43 [2] usbcore: registered new interface driver usb-storage
* Feb 3 16:19:43 [2] USB Mass Storage support registered.
* Feb 3 16:19:43 [2] ide-gd driver 1.18
* Feb 3 16:19:43 [2] hda: max request size: 128KiB
* Feb 3 16:19:43 [2] hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63
* Feb 3 16:19:43 [2] hda: cache flushes supported
* Feb 3 16:19:43 [2] hda:
* Feb 3 16:19:43 [2] hda1 hda2
* Feb 3 16:19:43 [2] ide-cd driver 5.00
* Feb 3 16:19:43 [2] ide-cd: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
* Feb 3 16:19:43 [2] Uniform CD-ROM driver Revision: 3.20
* Feb 3 16:19:48 [3] scsi 1:0:0:0: Direct-Access SanDisk Gigaware 8.02 PQ: 0 ANSI: 0 CCS
* Feb 3 16:19:48 [1] usb-storage: device scan complete
* Feb 3 16:19:48 [3] scsi 2:0:0:0: Direct-Access WD 10EADS External 1.75 PQ: 0 ANSI: 4
* Feb 3 16:19:48 [3] sd 1:0:0:0: [sdb] 7856127 512-byte hardware sectors: (4.02 GB/3.74 GiB)
* Feb 3 16:19:48 [3] sd 1:0:0:0: [sdb] Write Protect is off
* Feb 3 16:19:48 [1] sd 1:0:0:0: [sdb] Mode Sense: 45 00 00 08
* Feb 3 16:19:48 [5] sd 1:0:0:0: [sdb] Assuming drive cache: write through
* Feb 3 16:19:48 [5] sd 1:0:0:0: [sdb] Assuming drive cache: write through
* Feb 3 16:19:48 [2] sdb:
* Feb 3 16:19:48 [2] sdb1
* Feb 3 16:19:48 [1] usb-storage: device scan complete
* Feb 3 16:19:48 [3] sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
* Feb 3 16:19:48 [3] sd 2:0:0:0: [sdc] Write Protect is off
* Feb 3 16:19:48 [1] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
* Feb 3 16:19:48 [5] sd 2:0:0:0: [sdc] Assuming drive cache: write through
* Feb 3 16:19:48 [5] sd 2:0:0:0: [sdc] Assuming drive cache: write through
* Feb 3 16:19:48 [2] sdc:<5>sd 1:0:0:0: [sdb] Attached SCSI removable disk
* Feb 3 16:19:56 [4] sdc1
* Feb 3 16:19:56 [3] sd 2:0:0:0: [sdc] Attached SCSI disk
* Feb 3 16:20:11 [2] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
* Feb 3 16:37:55 [2] kjournald starting. Commit interval 5 seconds
* Feb 3 16:37:55 [2] EXT3 FS on sdc1, internal journal
* Feb 3 16:37:55 [2] EXT3-fs: mounted filesystem with writeback data mode.
* Feb 3 16:40:18 [2] Adding 1048568k swap on /export/Disk-1/_NL_SWAP/VRAM. Priority:-1 extents:360 across:2276796k
* Feb 3 16:44:06 [2] warning: `smbd' uses 32-bit capabilities (legacy support in use)
* Feb 4 20:46:29 [2] eth0: link down
* Feb 4 20:46:36 [2] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

What numbers are you expecting?

LOL!

I can help. Buy a gigabit NIC for each machine and a good gigabit switch. That should help allot.

Mike

Well i thought with a 100mps card you should get 100MB/s am I wrong about that?

It's 100Mbit/s or 12.5MByte/s - and that's absolute maximum including overheads - your results look good for 100Mbit/s!

I think that you need a little schooling about bits and bytes.

A 100Mb/sec link is 100 million bits of data per second. The lower case "b" in terms of data means bits where as an upper case "B" means Bytes. 8 bits is equal to 1 Byte. So the theoretical maximum transfer of a 100Mb/sec Ethernet link is 100000000/8 = 12500000 or in common terms, 12.5M bytes per second. Now Ethernet has overhead, framing and the like so in reality you are likely to get around 10-10.5MB/sec at most over a 100Mb/sec link like you are running.

Bottom line is that if you want to go faster, it's time for an upgrade. Also best if you do a bit of asking before buying parts as there is allot of good and bad networking hardware out there. Have a look at this link I posted a while back as well for the wire and infrastructure side of things. http://serverelements.com/forums/viewtopic.php?f=5&t=2471

Hope this helps to clear up your "poor" performance issues.

Mike