NASLite Network Attached Storage

Hi,

Looking for some help/advice if possible

I have setup Naslite-M2 without any problems, but it seems to take hours to check the storage filesystem is this normal ?

Its a core2 duo based system with 1gb Ram and a 500gb hdd installed at the moment.

I had to reboot the box, and now it seems to be checking the filesystem again, sems to do this everytime.

This could well be normal hopefully someone can give me a pointer, first time I have used this product but sofar very impressed.


Thanks

IF the shut down was disorderly then it will run an FSCK on the disk. It will have to finished that before the disk becomes usable. This is a safety precaution of the utility and there to protect your data from loss or corruption. It may take a bit of time to complete.

Mike

Hi mike,

Thanks for the reply, that would explain it then

wasnt sure it that was normal or not

Matt