NASLite Network Attached Storage

Upgraded from CDD to M2 last weekend and all seems fine apart from the UPNP service seems either not to be working or doesn't start.

DAAP working fine (once I realised I had to have AFP running at least RO).

UPNP configured and saved/rebooted etc. Swap on Disk-0 (though have also tried the other three disks I have in there).

Terminal screen on boot doesn't show UPNP under 'Starting servers'.

Web status pages show UPNP as 'UP'.

Memory usage by UPNP is shown as zero.

Swap space used shown as zero.

Disk configured for swap contains _NL_SWAP directory.

Contents are daap.log, VRAM and songs.gdb - 1kb, 3.1gb and 2mb respectively.

Syslog final entry after the disks mount is 'Unable to find swap-space signature'.

Machine has 1.5gb RAM.

WMP11 or Network not showing the UPNP device (but does find MediaTomb running on my Linux box).

The only disk with stuff under MEDIA has about 13000 MP3 files and as already mentioned, I can see them fine under iTunes.

Any ideas?

Sounds like a corrupt or locked swap file. Try the following:

- Disable DAAP and UPnP
- Save configuration
- Reboot
- Via FTP delete the _NL_SWAP folder and everything in it from all drives
- Reboot
- Enable DAAP and UPnP
- Set the swap target to a writable storage drive ie Disk-0
- Save configuration
- Reboot

That didn't solve the problem.

After switching off DAAP and UPNP, saving config and rebooting, examination of the drive contents showed the _NL_SWAP directory had gone and wan't present on any drive.

I re-enabled DAAP, UPNP, set swap to Disk-2 and saved/rebooted again. Sure enough the directory now appeared on Disk-2.

However, UPNP is still showing as UP but zero memory usage on the web status. Swap space is shown as zero also.

Directory contents are shown below ...

ftp> ls -l
200 PORT command successful. Consider using PASV.
150 Here comes the directory listing.
-rw-r--r-- 1 ftp ftp 3175088128 Jan 21 08:32 VRAM
-rw-r--r-- 1 ftp ftp 298 Jan 21 09:03 daap.log
-rw------- 1 ftp ftp 5271870 Jan 21 09:03 songs.gdb
226 Directory send OK.
ftp: 197 bytes received in 0.00Seconds 98.50Kbytes/sec.

Syslog final entry is ...

Jan 21 08:32:37 [4] Unable to find swap-space signature

DAAP log shows ...

2009-01-21 08:32:32: Starting signal handler
2009-01-21 08:32:33: Loading playlists
2009-01-21 08:32:33: Initializing database
2009-01-21 08:32:33: Starting mp3 scan
2009-01-21 09:03:23: Starting web server from /export/Status on port 3689
2009-01-21 09:03:23: Scanned 12733 songs in 1851 seconds

... and I can see the server/files in iTunes.

No sign of a UPNP device on my network though ...

That's strange

Can you post a syslog?

System Message Log:

Jan 21 08:32:37 [3] klogd started: BusyBox v1.01 (2008.07.26-02:54+0000)
Jan 21 08:32:37 [2] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jan 21 08:32:37 [2] CPU: L2 Cache: 256K (64 bytes/line)
Jan 21 08:32:37 [2] Intel machine check architecture supported.
Jan 21 08:32:37 [2] Intel machine check reporting enabled on CPU#0.
Jan 21 08:32:37 [1] CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
Jan 21 08:32:37 [1] CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Jan 21 08:32:37 [4] CPU: AMD Athlon(tm) XP 2000+ stepping 00
Jan 21 08:32:37 [2] Enabling fast FPU save and restore. done.
Jan 21 08:32:37 [2] Enabling unmasked SIMD FPU exception support. done.
Jan 21 08:32:37 [2] Checking 'hlt' instruction. OK.
Jan 21 08:32:37 [4] POSIX conformance testing by UNIFIX
Jan 21 08:32:37 [4] enabled ExtINT on CPU#0
Jan 21 08:32:37 [4] ESR value before enabling vector: 00000000
Jan 21 08:32:37 [4] ESR value after enabling vector: 00000000
Jan 21 08:32:37 [4] ENABLING IO-APIC IRQs
Jan 21 08:32:37 [1] init IO_APIC IRQs
Jan 21 08:32:37 [1] IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
Jan 21 08:32:37 [2] TIMER: vector=0x31 pin1=2 pin2=-1
Jan 21 08:32:37 [5] MP-BIOS bug: 8254 timer not connected to IO-APIC
Jan 21 08:32:37 [2] .trying to set up timer (IRQ0) through the 8259A . failed.
Jan 21 08:32:37 [2] .trying to set up timer as Virtual Wire IRQ. failed.
Jan 21 08:32:37 [2] .trying to set up timer as ExtINT IRQ. works.
Jan 21 08:32:37 [4] Using local APIC timer interrupts.
Jan 21 08:32:37 [4] calibrating APIC timer .
Jan 21 08:32:37 [4] . CPU clock speed is 1664.1736 MHz.
Jan 21 08:32:37 [4] . host bus clock speed is 266.2676 MHz.
Jan 21 08:32:37 [4] cpu: 0, clocks: 2662676, slice: 1331338
Jan 21 08:32:37 [4] CPU0
Jan 21 08:32:37 [4] mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Jan 21 08:32:37 [4] mtrr: detected mtrr type: Intel
Jan 21 08:32:37 [2] ACPI: Subsystem revision 20040326
Jan 21 08:32:37 [2] PCI: PCI BIOS revision 2.10 entry at 0xfbc60, last bus=2
Jan 21 08:32:37 [2] PCI: Using configuration type 1
Jan 21 08:32:37 [2] ACPI: Interpreter enabled
Jan 21 08:32:37 [2] ACPI: Using IOAPIC for interrupt routing
Jan 21 08:32:37 [2] ACPI: System [ACPI] (supports S0 S1 S4 S5)
Jan 21 08:32:37 [2] ACPI: PCI Root Bridge [PCI0] (00:00)
Jan 21 08:32:37 [4] PCI: Probing PCI hardware (bus 00)
Jan 21 08:32:37 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 21 08:32:37 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jan 21 08:32:37 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
Jan 21 08:32:37 [4] PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Jan 21 08:32:37 [2] PCI: Probing PCI hardware
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
Jan 21 08:32:37 [1] 00:00:01[A] -> 2-23 -> IRQ 23 level high
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
Jan 21 08:32:37 [1] 00:00:02[A] -> 2-22 -> IRQ 22 level high
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
Jan 21 08:32:37 [1] 00:00:02[B] -> 2-21 -> IRQ 21 level high
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
Jan 21 08:32:37 [1] 00:00:02[C] -> 2-20 -> IRQ 20 level high
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCI] enabled at IRQ 21
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCK] enabled at IRQ 22
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 22
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Jan 21 08:32:37 [1] 00:01:06[A] -> 2-18 -> IRQ 18 level high
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Jan 21 08:32:37 [1] 00:01:06[B] -> 2-19 -> IRQ 19 level high
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Jan 21 08:32:37 [1] 00:01:06[C] -> 2-16 -> IRQ 16 level high
Jan 21 08:32:37 [4] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
Jan 21 08:32:37 [1] 00:01:06[D] -> 2-17 -> IRQ 17 level high
Jan 21 08:32:37 [1] number of MP IRQ sources: 15.
Jan 21 08:32:37 [1] number of IO-APIC #2 registers: 24.
Jan 21 08:32:37 [2] testing the IO APIC.
Jan 21 08:32:37 [4]
Jan 21 08:32:37 [1] IO APIC #2
Jan 21 08:32:37 [1] register #00: 02000000
Jan 21 08:32:37 [1] . : physical APIC id: 02
Jan 21 08:32:37 [1] . : Delivery Type: 0
Jan 21 08:32:37 [1] . : LTS : 0
Jan 21 08:32:37 [1] register #01: 00170011
Jan 21 08:32:37 [1] . : max redirection entries: 0017
Jan 21 08:32:37 [1] . : PRQ implemented: 0
Jan 21 08:32:37 [1] . : IO APIC version: 0011
Jan 21 08:32:37 [1] register #02: 00000000
Jan 21 08:32:37 [1] . : arbitration: 00
Jan 21 08:32:37 [1] IRQ redirection table:
Jan 21 08:32:37 [1] NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Jan 21 08:32:37 [1] 00 000 00 1 0 0 0 0 0 0 00
Jan 21 08:32:37 [1] 01 001 01 0 0 0 0 0 1 1 39
Jan 21 08:32:37 [1] 02 000 00 1 0 0 0 0 0 0 00
Jan 21 08:32:37 [1] 03 001 01 0 0 0 0 0 1 1 41
Jan 21 08:32:37 [1] 04 001 01 0 0 0 0 0 1 1 49
Jan 21 08:32:37 [1] 05 001 01 0 0 0 0 0 1 1 51
Jan 21 08:32:37 [1] 06 001 01 0 0 0 0 0 1 1 59
Jan 21 08:32:37 [1] 07 001 01 1 0 0 0 0 1 1 61
Jan 21 08:32:37 [1] 08 001 01 0 0 0 0 0 1 1 69
Jan 21 08:32:37 [1] 09 001 01 0 1 0 0 0 1 1 71
Jan 21 08:32:37 [1] 0a 001 01 0 0 0 0 0 1 1 79
Jan 21 08:32:37 [1] 0b 001 01 0 0 0 0 0 1 1 81
Jan 21 08:32:37 [1] 0c 001 01 0 0 0 0 0 1 1 89
Jan 21 08:32:37 [1] 0d 001 01 0 0 0 0 0 1 1 91
Jan 21 08:32:37 [1] 0e 001 01 0 0 0 0 0 1 1 99
Jan 21 08:32:37 [1] 0f 001 01 0 0 0 0 0 1 1 A1
Jan 21 08:32:37 [1] 10 001 01 1 1 0 0 0 1 1 D9
Jan 21 08:32:37 [1] 11 001 01 1 1 0 0 0 1 1 E1
Jan 21 08:32:37 [1] 12 001 01 1 1 0 0 0 1 1 C9
Jan 21 08:32:37 [1] 13 001 01 1 1 0 0 0 1 1 D1
Jan 21 08:32:37 [1] 14 001 01 1 1 0 0 0 1 1 C1
Jan 21 08:32:37 [1] 15 001 01 1 1 0 0 0 1 1 B9
Jan 21 08:32:37 [1] 16 001 01 1 1 0 0 0 1 1 B1
Jan 21 08:32:37 [1] 17 001 01 1 1 0 0 0 1 1 A9
Jan 21 08:32:37 [1] IRQ to pin mappings:
Jan 21 08:32:37 [1] IRQ0 -> 0:2
Jan 21 08:32:37 [1] IRQ1 -> 0:1
Jan 21 08:32:37 [1] IRQ3 -> 0:3
Jan 21 08:32:37 [1] IRQ4 -> 0:4
Jan 21 08:32:37 [1] IRQ5 -> 0:5
Jan 21 08:32:37 [1] IRQ6 -> 0:6
Jan 21 08:32:37 [1] IRQ7 -> 0:7
Jan 21 08:32:37 [1] IRQ8 -> 0:8
Jan 21 08:32:37 [1] IRQ9 -> 0:9
Jan 21 08:32:37 [1] IRQ10 -> 0:10
Jan 21 08:32:37 [1] IRQ11 -> 0:11
Jan 21 08:32:37 [1] IRQ12 -> 0:12
Jan 21 08:32:37 [1] IRQ13 -> 0:13
Jan 21 08:32:37 [1] IRQ14 -> 0:14
Jan 21 08:32:37 [1] IRQ15 -> 0:15
Jan 21 08:32:37 [1] IRQ16 -> 0:16
Jan 21 08:32:37 [1] IRQ17 -> 0:17
Jan 21 08:32:37 [1] IRQ18 -> 0:18
Jan 21 08:32:37 [1] IRQ19 -> 0:19
Jan 21 08:32:37 [1] IRQ20 -> 0:20
Jan 21 08:32:37 [1] IRQ21 -> 0:21
Jan 21 08:32:37 [1] IRQ22 -> 0:22
Jan 21 08:32:37 [1] IRQ23 -> 0:23
Jan 21 08:32:37 [2] done.
Jan 21 08:32:37 [2] PCI: Using ACPI for IRQ routing
Jan 21 08:32:37 [2] Linux NET4.0 for Linux 2.4
Jan 21 08:32:37 [2] Based upon Swansea University Computer Society NET3.039
Jan 21 08:32:37 [4] Initializing RT netlink socket
Jan 21 08:32:37 [4] Starting kswapd
Jan 21 08:32:37 [4] allocated 32 pages and 32 bhs reserved for the highmem bounces
Jan 21 08:32:37 [2] Journalled Block Device driver loaded
Jan 21 08:32:37 [2] devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Jan 21 08:32:37 [2] devfs: boot_options: 0x1
Jan 21 08:32:37 [2] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 21 08:32:37 [2] ACPI: Power Button (FF) [PWRF]
Jan 21 08:32:37 [2] ACPI: Processor [CPU0] (supports C1)
Jan 21 08:32:37 [2] ACPI: Thermal Zone [THRM] (20 C)
Jan 21 08:32:37 [4] pty: 256 Unix98 ptys configured
Jan 21 08:32:37 [2] Real Time Clock Driver v1.10f
Jan 21 08:32:37 [8] 6>Floppy drive(s): fd0 is 1.44M
Jan 21 08:32:37 [2] FDC 0 is a post-1991 82077
Jan 21 08:32:37 [4] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Jan 21 08:32:37 [2] loop: loaded (max 8 devices)
Jan 21 08:32:37 [2] Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
Jan 21 08:32:37 [2] Copyright (c) 1999-2006 Intel Corporation.
Jan 21 08:32:37 [2] e1000: 01:09.0: e1000_probe: (PCI:33MHz:32-bit) 00:1b:21:0b:b9:08
Jan 21 08:32:37 [2] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Jan 21 08:32:37 [2] dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Jan 21 08:32:37 [4] FW Version=$Version$
Jan 21 08:32:37 [2] pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Jan 21 08:32:37 [2] ThunderLAN driver v1.15
Jan 21 08:32:37 [2] TLAN: 0 devices installed, PCI: 0 EISA: 0
Jan 21 08:32:37 [2] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Jan 21 08:32:37 [2] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Jan 21 08:32:37 [4] sk98lin: No adapter found.
Jan 21 08:32:37 [2] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Jan 21 08:32:37 [2] Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Jan 21 08:32:37 [2] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 21 08:32:37 [2] NFORCE2: IDE controller at PCI slot 00:09.0
Jan 21 08:32:37 [2] NFORCE2: chipset revision 162
Jan 21 08:32:37 [2] NFORCE2: not 100% native mode: will probe irqs later
Jan 21 08:32:37 [4] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Jan 21 08:32:37 [4] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Jan 21 08:32:37 [2] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 21 08:32:37 [2] NFORCE2: 00:09.0 (rev a2) UDMA133 controller
Jan 21 08:32:37 [2] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Jan 21 08:32:37 [2] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Jan 21 08:32:37 [4] hda: Maxtor 6L300R0, ATA DISK drive
Jan 21 08:32:37 [4] hdb: Maxtor 6L250R0, ATA DISK drive
Jan 21 08:32:37 [4] hdc: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
Jan 21 08:32:37 [4] hdd: Maxtor 4R120L0, ATA DISK drive
Jan 21 08:32:37 [4] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 21 08:32:37 [4] ide1 at 0x170-0x177,0x376 on irq 15
Jan 21 08:32:37 [4] hda: attached ide-disk driver.
Jan 21 08:32:37 [4] hda: host protected area => 1
Jan 21 08:32:37 [2] hda: 586114704 sectors (300091 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(133)
Jan 21 08:32:37 [4] hdb: attached ide-disk driver.
Jan 21 08:32:37 [4] hdb: host protected area => 1
Jan 21 08:32:37 [2] hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(133)
Jan 21 08:32:37 [4] hdd: attached ide-disk driver.
Jan 21 08:32:37 [4] hdd: host protected area => 1
Jan 21 08:32:37 [2] hdd: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(133)
Jan 21 08:32:37 [4] hdc: attached ide-cdrom driver.
Jan 21 08:32:37 [2] hdc: ATAPI 16X DVD-ROM drive, 1725kB Cache
Jan 21 08:32:37 [2] Uniform CD-ROM driver Revision: 3.12
Jan 21 08:32:37 [2] Partition check:
Jan 21 08:32:37 [2] /dev/ide/host0/bus0/target0/lun0: p1
Jan 21 08:32:37 [2] /dev/ide/host0/bus0/target1/lun0: p1
Jan 21 08:32:37 [2] /dev/ide/host0/bus1/target1/lun0: p1
Jan 21 08:32:37 [2] SCSI subsystem driver Revision: 1.00
Jan 21 08:32:37 [2] Loading Adaptec I2O RAID: Version 2.4 Build 5
Jan 21 08:32:37 [2] Detecting Adaptec I2O RAID controllers.
Jan 21 08:32:37 [2] Red Hat/Adaptec aacraid driver (1.1-3 Jul 16 2008 21:50:42)
Jan 21 08:32:37 [4] scsi: Detection failed (no card)
Jan 21 08:32:37 [3] megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Jan 21 08:32:37 [4] GDT-HA: Storage RAID Controller Driver. Version: 3.04
Jan 21 08:32:37 [4] GDT-HA: Found 0 PCI Storage RAID Controllers
Jan 21 08:32:37 [2] scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Jan 21 08:32:37 [4] 3ware Storage Controller device driver for Linux v1.02.00.037.
Jan 21 08:32:37 [4] 3w-xxxx: No cards found.
Jan 21 08:32:37 [1] libata version 1.20 loaded.
Jan 21 08:32:37 [1] PCI(01:0b.0): version 0.9
Jan 21 08:32:37 [2] ata1: SATA max UDMA/100 cmd 0xF882D080 ctl 0xF882D08A bmdma 0xF882D000 irq 18
Jan 21 08:32:37 [2] ata2: SATA max UDMA/100 cmd 0xF882D0C0 ctl 0xF882D0CA bmdma 0xF882D008 irq 18
Jan 21 08:32:37 [1] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f
Jan 21 08:32:37 [2] ata1: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
Jan 21 08:32:37 [2] ata1: dev 0 configured for UDMA/100
Jan 21 08:32:37 [2] ata2: no device found (phy stat 00000000)
Jan 21 08:32:37 [2] scsi2 : sata_sil
Jan 21 08:32:37 [2] scsi3 : sata_sil
Jan 21 08:32:37 [4] Vendor: ATA Model: ST3500641AS Rev: 3.AA
Jan 21 08:32:37 [4] Type: Direct-Access ANSI SCSI revision: 05
Jan 21 08:32:37 [4] Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Jan 21 08:32:37 [4] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Jan 21 08:32:37 [2] /dev/scsi/host2/bus0/target0/lun0: p1
Jan 21 08:32:37 [2] raw1394: /dev/raw1394 device initialized
Jan 21 08:32:37 [2] sbp2: $Rev: 1074 $ Ben Collins
Jan 21 08:32:37 [5] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Jan 21 08:32:37 [2] devfs
Jan 21 08:32:37 [2] usb.c: registered new driver hub
Jan 21 08:32:37 [1] PCI: Setting latency timer of device 00:02.2 to 64
Jan 21 08:32:37 [2] ehci_hcd 00:02.2: PCI device 10de:0068
Jan 21 08:32:37 [2] ehci_hcd 00:02.2: irq 20, pci mem f882f000
Jan 21 08:32:37 [2] usb.c: new USB bus registered, assigned bus number 1
Jan 21 08:32:37 [1] PCI: cache line size of 64 is not supported by device 00:02.2
Jan 21 08:32:37 [2] ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 21 08:32:37 [2] hub.c: USB hub found
Jan 21 08:32:37 [2] hub.c: 6 ports detected
Jan 21 08:32:37 [2] host/uhci.c: USB Universal Host Controller Interface driver v1.1
Jan 21 08:32:37 [1] PCI: Setting latency timer of device 00:02.0 to 64
Jan 21 08:32:37 [2] host/usb-ohci.c: USB OHCI at membase 0xf8831000, IRQ 22
Jan 21 08:32:37 [2] host/usb-ohci.c: usb-00:02.0, PCI device 10de:0067
Jan 21 08:32:37 [2] usb.c: new USB bus registered, assigned bus number 2
Jan 21 08:32:37 [2] hub.c: USB hub found
Jan 21 08:32:37 [2] hub.c: 3 ports detected
Jan 21 08:32:37 [1] PCI: Setting latency timer of device 00:02.1 to 64
Jan 21 08:32:37 [2] host/usb-ohci.c: USB OHCI at membase 0xf8833000, IRQ 21
Jan 21 08:32:37 [2] host/usb-ohci.c: usb-00:02.1, PCI device 10de:0067
Jan 21 08:32:37 [2] usb.c: new USB bus registered, assigned bus number 3
Jan 21 08:32:37 [2] hub.c: USB hub found
Jan 21 08:32:37 [2] hub.c: 3 ports detected
Jan 21 08:32:37 [2] usb.c: registered new driver usbkbd
Jan 21 08:32:37 [2] usbkbd.c: :USB HID Boot Protocol keyboard driver
Jan 21 08:32:37 [2] Initializing USB Mass Storage driver.
Jan 21 08:32:37 [2] usb.c: registered new driver usb-storage
Jan 21 08:32:37 [2] USB Mass Storage support registered.
Jan 21 08:32:37 [2] NET4: Linux TCP/IP 1.0 for NET4.0
Jan 21 08:32:37 [2] IP Protocols: ICMP, UDP, TCP
Jan 21 08:32:37 [2] IP: routing cache hash table of 16384 buckets, 128Kbytes
Jan 21 08:32:37 [2] TCP: Hash tables configured (established 262144 bind 65536)
Jan 21 08:32:37 [2] NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 21 08:32:37 [3] RAMDISK: NASLite file system found at block 0
Jan 21 08:32:37 [4] [truncated]
Jan 21 08:32:37 [4] VFS: Mounted root (ext2 filesystem).
Jan 21 08:32:37 [2] Mounted devfs on /dev
Jan 21 08:32:37 [2] Freeing unused kernel memory: 556k freed
Jan 21 08:32:37 [2] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Jan 21 08:32:37 [2] kjournald starting. Commit interval 5 seconds
Jan 21 08:32:37 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Jan 21 08:32:37 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 21 08:32:37 [2] kjournald starting. Commit interval 5 seconds
Jan 21 08:32:37 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
Jan 21 08:32:37 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 21 08:32:37 [2] kjournald starting. Commit interval 5 seconds
Jan 21 08:32:37 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,65), internal journal
Jan 21 08:32:37 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 21 08:32:37 [2] kjournald starting. Commit interval 5 seconds
Jan 21 08:32:37 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
Jan 21 08:32:37 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 21 08:32:37 [3] lockd: unauthenticated request from (ac100121:923)
Jan 21 08:32:37 [4] Unable to find swap-space signature

What on your LAN has IP 172.16.1.33?

Also, how did you install M2? Did you upgrade from HDD?

Stuff's missing from this syslog. No clue why. Second line of a normal syslog should read liek this * _date_ [4] Linux version 2.4.36.NASLite (root@tzt) (gcc version 3.4.6) #2 Wed Jul 16 21:48:01 EDT 2008 and it's missing. Something's not right.

I was running the latest version of CDD (having upgraded several times).

I'm running M2 now booted directly off the CD.

172.16.1.33 is in the DHCP range of my network - today it's my Vista box.

Today's startup syslog is below ...

System Message Log:

Jan 23 07:38:17 [3] klogd started: BusyBox v1.01 (2008.07.26-02:54+0000)
Jan 23 07:38:17 [2] 4K (64 bytes/line)
Jan 23 07:38:17 [2] CPU: L2 Cache: 256K (64 bytes/line)
Jan 23 07:38:17 [2] Intel machine check architecture supported.
Jan 23 07:38:17 [2] Intel machine check reporting enabled on CPU#0.
Jan 23 07:38:17 [1] CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
Jan 23 07:38:17 [1] CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Jan 23 07:38:17 [4] CPU: AMD Athlon(tm) XP 2000+ stepping 00
Jan 23 07:38:17 [2] Enabling fast FPU save and restore. done.
Jan 23 07:38:17 [2] Enabling unmasked SIMD FPU exception support. done.
Jan 23 07:38:17 [2] Checking 'hlt' instruction. OK.
Jan 23 07:38:17 [4] POSIX conformance testing by UNIFIX
Jan 23 07:38:17 [4] enabled ExtINT on CPU#0
Jan 23 07:38:17 [4] ESR value before enabling vector: 00000000
Jan 23 07:38:17 [4] ESR value after enabling vector: 00000000
Jan 23 07:38:17 [4] ENABLING IO-APIC IRQs
Jan 23 07:38:17 [1] init IO_APIC IRQs
Jan 23 07:38:17 [1] IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
Jan 23 07:38:17 [2] TIMER: vector=0x31 pin1=2 pin2=-1
Jan 23 07:38:17 [5] MP-BIOS bug: 8254 timer not connected to IO-APIC
Jan 23 07:38:17 [2] .trying to set up timer (IRQ0) through the 8259A . failed.
Jan 23 07:38:17 [2] .trying to set up timer as Virtual Wire IRQ. failed.
Jan 23 07:38:17 [2] .trying to set up timer as ExtINT IRQ. works.
Jan 23 07:38:17 [4] Using local APIC timer interrupts.
Jan 23 07:38:17 [4] calibrating APIC timer .
Jan 23 07:38:17 [4] . CPU clock speed is 1664.1724 MHz.
Jan 23 07:38:17 [4] . host bus clock speed is 266.2675 MHz.
Jan 23 07:38:17 [4] cpu: 0, clocks: 2662675, slice: 1331337
Jan 23 07:38:17 [4] CPU0
Jan 23 07:38:17 [4] mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Jan 23 07:38:17 [4] mtrr: detected mtrr type: Intel
Jan 23 07:38:17 [2] ACPI: Subsystem revision 20040326
Jan 23 07:38:17 [2] PCI: PCI BIOS revision 2.10 entry at 0xfbc60, last bus=2
Jan 23 07:38:17 [2] PCI: Using configuration type 1
Jan 23 07:38:17 [2] ACPI: Interpreter enabled
Jan 23 07:38:17 [2] ACPI: Using IOAPIC for interrupt routing
Jan 23 07:38:17 [2] ACPI: System [ACPI] (supports S0 S1 S4 S5)
Jan 23 07:38:17 [2] ACPI: PCI Root Bridge [PCI0] (00:00)
Jan 23 07:38:17 [4] PCI: Probing PCI hardware (bus 00)
Jan 23 07:38:17 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 23 07:38:17 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jan 23 07:38:17 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] bled.
Jan 23 07:38:17 [2] PCI: Probing PCI hardware
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
Jan 23 07:38:17 [1] 00:00:01[A] -> 2-23 -> IRQ 23 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
Jan 23 07:38:17 [1] 00:00:02[A] -> 2-22 -> IRQ 22 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
Jan 23 07:38:17 [1] 00:00:02[B] -> 2-21 -> IRQ 21 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
Jan 23 07:38:17 [1] 00:00:02[C] -> 2-20 -> IRQ 20 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCI] enabled at IRQ 21
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCK] enabled at IRQ 22
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 22
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Jan 23 07:38:17 [1] 00:01:06[A] -> 2-18 -> IRQ 18 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Jan 23 07:38:17 [1] 00:01:06[B] -> 2-19 -> IRQ 19 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Jan 23 07:38:17 [1] 00:01:06[C] -> 2-16 -> IRQ 16 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
Jan 23 07:38:17 [1] 00:01:06[D] -> 2-17 -> IRQ 17 level high
Jan 23 07:38:17 [1] number of MP IRQ sources: 15.
Jan 23 07:38:17 [1] number of IO-APIC #2 registers: 24.
Jan 23 07:38:17 [2] testing the IO APIC.
Jan 23 07:38:17 [4]
Jan 23 07:38:17 [1] IO APIC #2
Jan 23 07:38:17 [1] register #00: 02000000
Jan 23 07:38:17 [1] . : physical APIC id: 02
Jan 23 07:38:17 [1] . : Delivery Type: 0
Jan 23 07:38:17 [1] . : LTS : 0
Jan 23 07:38:17 [1] register #01: 00170011
Jan 23 07:38:17 [1] . : max redirection entries: 0017
Jan 23 07:38:17 [1] . : PRQ implemented: 0
Jan 23 07:38:17 [1] . : IO APIC version: 0011
Jan 23 07:38:17 [1] register #02: 00000000
Jan 23 07:38:17 [1] . : arbitration: 00
Jan 23 07:38:17 [1] IRQ redirection table:
Jan 23 07:38:17 [1] NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Jan 23 07:38:17 [1] 00 000 00 1 0 0 0 0 0 0 00
Jan 23 07:38:17 [1] 01 001 01 0 0 0 0 0 1 1 39
Jan 23 07:38:17 [1] 02 000 00 1 0 0 0 0 0 0 00
Jan 23 07:38:17 [1] 03 001 01 0 0 0 0 0 1 1 41
Jan 23 07:38:17 [1] 04 001 01 0 0 0 0 0 1 1 49
Jan 23 07:38:17 [1] 05 001 01 0 0 0 0 0 1 1 51
Jan 23 07:38:17 [1] 06 001 01 0 0 0 0 0 1 1 59
Jan 23 07:38:17 [1] 07 001 01 1 0 0 0 0 1 1 61
Jan 23 07:38:17 [1] 08 001 01 0 0 0 0 0 1 1 69
Jan 23 07:38:17 [1] 09 001 01 0 1 0 0 0 1 1 71
Jan 23 07:38:17 [1] 0a 001 01 0 0 0 0 0 1 1 79
Jan 23 07:38:17 [1] 0b 001 01 0 0 0 0 0 1 1 81
Jan 23 07:38:17 [1] 0c 001 01 0 0 0 0 0 1 1 89
Jan 23 07:38:17 [1] 0d 001 01 0 0 0 0 0 1 1 91
Jan 23 07:38:17 [1] 0e 001 01 0 0 0 0 0 1 1 99
Jan 23 07:38:17 [1] 0f 001 01 0 0 0 0 0 1 1 A1
Jan 23 07:38:17 [1] 10 001 01 1 1 0 0 0 1 1 D9
Jan 23 07:38:17 [1] 11 001 01 1 1 0 0 0 1 1 E1
Jan 23 07:38:17 [1] 12 001 01 1 1 0 0 0 1 1 C9
Jan 23 07:38:17 [1] 13 001 01 1 1 0 0 0 1 1 D1
Jan 23 07:38:17 [1] 14 001 01 1 1 0 0 0 1 1 C1
Jan 23 07:38:17 [1] 15 001 01 1 1 0 0 0 1 1 B9
Jan 23 07:38:17 [1] 16 001 01 1 1 0 0 0 1 1 B1
Jan 23 07:38:17 [1] 17 001 01 1 1 0 0 0 1 1 A9
Jan 23 07:38:17 [1] IRQ to pin mappings:
Jan 23 07:38:17 [1] IRQ0 -> 0:2
Jan 23 07:38:17 [1] IRQ1 -> 0:1
Jan 23 07:38:17 [1] IRQ3 -> 0:3
Jan 23 07:38:17 [1] IRQ4 -> 0:4
Jan 23 07:38:17 [1] IRQ5 -> 0:5
Jan 23 07:38:17 [1] IRQ6 -> 0:6
Jan 23 07:38:17 [1] IRQ7 -> 0:7
Jan 23 07:38:17 [1] IRQ8 -> 0:8
Jan 23 07:38:17 [1] IRQ9 -> 0:9
Jan 23 07:38:17 [1] IRQ10 -> 0:10
Jan 23 07:38:17 [1] IRQ11 -> 0:11
Jan 23 07:38:17 [1] IRQ12 -> 0:12
Jan 23 07:38:17 [1] IRQ13 -> 0:13
Jan 23 07:38:17 [1] IRQ14 -> 0:14
Jan 23 07:38:17 [1] IRQ15 -> 0:15
Jan 23 07:38:17 [1] IRQ16 -> 0:16
Jan 23 07:38:17 [1] IRQ17 -> 0:17
Jan 23 07:38:17 [1] IRQ18 -> 0:18
Jan 23 07:38:17 [1] IRQ19 -> 0:19
Jan 23 07:38:17 [1] IRQ20 -> 0:20
Jan 23 07:38:17 [1] IRQ21 -> 0:21
Jan 23 07:38:17 [1] IRQ22 -> 0:22
Jan 23 07:38:17 [1] IRQ23 -> 0:23
Jan 23 07:38:17 [2] done.
Jan 23 07:38:17 [2] PCI: Using ACPI for IRQ routing
Jan 23 07:38:17 [2] Linux NET4.0 for Linux 2.4
Jan 23 07:38:17 [2] Based upon Swansea University Computer Society NET3.039
Jan 23 07:38:17 [4] Initializing RT netlink socket
Jan 23 07:38:17 [4] Starting kswapd
Jan 23 07:38:17 [4] allocated 32 pages and 32 bhs reserved for the highmem bounces
Jan 23 07:38:17 [2] Journalled Block Device driver loaded
Jan 23 07:38:17 [2] devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Jan 23 07:38:17 [2] devfs: boot_options: 0x1
Jan 23 07:38:17 [2] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 23 07:38:17 [2] ACPI: Power Button (FF) [PWRF]
Jan 23 07:38:17 [2] ACPI: Processor [CPU0] (supports C1)
Jan 23 07:38:17 [2] ACPI: Thermal Zone [THRM] (20 C)
Jan 23 07:38:17 [4] pty: 256 Unix98 ptys configured
Jan 23 07:38:17 [2] Real Time Clock Driver v1.10f
Jan 23 07:38:17 [2] Floppy drive(s): fd0 is 1.44M
Jan 23 07:38:17 [4] ut - AT keyboard not present?(ed)
Jan 23 07:38:17 [4] keyboard: Timeout - AT keyboard not present?(f4)
Jan 23 07:38:17 [2] FDC 0 is a post-1991 82077
Jan 23 07:38:17 [4] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Jan 23 07:38:17 [2] loop: loaded (max 8 devices)
Jan 23 07:38:17 [2] Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
Jan 23 07:38:17 [2] Copyright (c) 1999-2006 Intel Corporation.
Jan 23 07:38:17 [2] e1000: 01:09.0: e1000_probe: (PCI:33MHz:32-bit) 00:1b:21:0b:b9:08
Jan 23 07:38:17 [2] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Jan 23 07:38:17 [2] dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Jan 23 07:38:17 [4] FW Version=$Version$
Jan 23 07:38:17 [2] pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Jan 23 07:38:17 [2] ThunderLAN driver v1.15
Jan 23 07:38:17 [2] TLAN: 0 devices installed, PCI: 0 EISA: 0
Jan 23 07:38:17 [2] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Jan 23 07:38:17 [2] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Jan 23 07:38:17 [4] sk98lin: No adapter found.
Jan 23 07:38:17 [2] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Jan 23 07:38:17 [2] Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Jan 23 07:38:17 [2] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 23 07:38:17 [2] NFORCE2: IDE controller at PCI slot 00:09.0
Jan 23 07:38:17 [2] NFORCE2: chipset revision 162
Jan 23 07:38:17 [2] NFORCE2: not 100% native mode: will probe irqs later
Jan 23 07:38:17 [4] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Jan 23 07:38:17 [4] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Jan 23 07:38:17 [2] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 23 07:38:17 [2] NFORCE2: 00:09.0 (rev a2) UDMA133 controller
Jan 23 07:38:17 [2] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Jan 23 07:38:17 [2] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Jan 23 07:38:17 [4] hda: Maxtor 6L300R0, ATA DISK drive
Jan 23 07:38:17 [4] hdb: Maxtor 6L250R0, ATA DISK drive
Jan 23 07:38:17 [4] hdc: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
Jan 23 07:38:17 [4] hdd: Maxtor 4R120L0, ATA DISK drive
Jan 23 07:38:17 [4] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 23 07:38:17 [4] ide1 at 0x170-0x177,0x376 on irq 15
Jan 23 07:38:17 [4] hda: attached ide-disk driver.
Jan 23 07:38:17 [4] hda: host protected area => 1
Jan 23 07:38:17 [2] hda: 586114704 sectors (300091 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(133)
Jan 23 07:38:17 [4] hdb: attached ide-disk driver.
Jan 23 07:38:17 [4] hdb: host protected area => 1
Jan 23 07:38:17 [2] hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(133)
Jan 23 07:38:17 [4] hdd: attached ide-disk driver.
Jan 23 07:38:17 [4] hdd: host protected area => 1
Jan 23 07:38:17 [2] hdd: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(133)
Jan 23 07:38:17 [4] hdc: attached ide-cdrom driver.
Jan 23 07:38:17 [2] hdc: ATAPI 16X DVD-ROM drive, 1725kB Cache
Jan 23 07:38:17 [2] Uniform CD-ROM driver Revision: 3.12
Jan 23 07:38:17 [2] Partition check:
Jan 23 07:38:17 [2] /dev/ide/host0/bus0/target0/lun0: p1
Jan 23 07:38:17 [2] /dev/ide/host0/bus0/target1/lun0: p1
Jan 23 07:38:17 [2] /dev/ide/host0/bus1/target1/lun0: p1
Jan 23 07:38:17 [2] SCSI subsystem driver Revision: 1.00
Jan 23 07:38:17 [2] Loading Adaptec I2O RAID: Version 2.4 Build 5
Jan 23 07:38:17 [2] Detecting Adaptec I2O RAID controllers.
Jan 23 07:38:17 [2] Red Hat/Adaptec aacraid driver (1.1-3 Jul 16 2008 21:50:42)
Jan 23 07:38:17 [4] scsi: Detection failed (no card)
Jan 23 07:38:17 [3] megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Jan 23 07:38:17 [4] GDT-HA: Storage RAID Controller Driver. Version: 3.04
Jan 23 07:38:17 [4] GDT-HA: Found 0 PCI Storage RAID Controllers
Jan 23 07:38:17 [2] scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Jan 23 07:38:17 [4] 3ware Storage Controller device driver for Linux v1.02.00.037.
Jan 23 07:38:17 [4] 3w-xxxx: No cards found.
Jan 23 07:38:17 [1] libata version 1.20 loaded.
Jan 23 07:38:17 [1] PCI(01:0b.0): version 0.9
Jan 23 07:38:17 [2] ata1: SATA max UDMA/100 cmd 0xF882D080 ctl 0xF882D08A bmdma 0xF882D000 irq 18
Jan 23 07:38:17 [2] ata2: SATA max UDMA/100 cmd 0xF882D0C0 ctl 0xF882D0CA bmdma 0xF882D008 irq 18
Jan 23 07:38:17 [1] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:007f
Jan 23 07:38:17 [2] ata1: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
Jan 23 07:38:17 [2] ata1: dev 0 configured for UDMA/100
Jan 23 07:38:17 [2] ata2: no device found (phy stat 00000000)
Jan 23 07:38:17 [2] scsi2 : sata_sil
Jan 23 07:38:17 [2] scsi3 : sata_sil
Jan 23 07:38:17 [4] Vendor: ATA Model: ST3500641AS Rev: 3.AA
Jan 23 07:38:17 [4] Type: Direct-Access ANSI SCSI revision: 05
Jan 23 07:38:17 [4] Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Jan 23 07:38:17 [4] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Jan 23 07:38:17 [2] /dev/scsi/host2/bus0/target0/lun0: p1
Jan 23 07:38:17 [2] raw1394: /dev/raw1394 device initialized
Jan 23 07:38:17 [2] sbp2: $Rev: 1074 $ Ben Collins
Jan 23 07:38:17 [5] (serialize_io = 1)
Jan 23 07:38:17 [2] usb.c: registered new driver usbdevfs
Jan 23 07:38:17 [2] usb.c: registered new driver hub
Jan 23 07:38:17 [1] PCI: Setting latency timer of device 00:02.2 to 64
Jan 23 07:38:17 [2] ehci_hcd 00:02.2: PCI device 10de:0068
Jan 23 07:38:17 [2] ehci_hcd 00:02.2: irq 20, pci mem f882f000
Jan 23 07:38:17 [2] usb.c: new USB bus registered, assigned bus number 1
Jan 23 07:38:17 [1] PCI: cache line size of 64 is not supported by device 00:02.2
Jan 23 07:38:17 [2] ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 23 07:38:17 [2] hub.c: USB hub found
Jan 23 07:38:17 [2] hub.c: 6 ports detected
Jan 23 07:38:17 [2] host/uhci.c: USB Universal Host Controller Interface driver v1.1
Jan 23 07:38:17 [1] PCI: Setting latency timer of device 00:02.0 to 64
Jan 23 07:38:17 [2] host/usb-ohci.c: USB OHCI at membase 0xf8831000, IRQ 22
Jan 23 07:38:17 [2] host/usb-ohci.c: usb-00:02.0, PCI device 10de:0067
Jan 23 07:38:17 [2] usb.c: new USB bus registered, assigned bus number 2
Jan 23 07:38:17 [2] hub.c: USB hub found
Jan 23 07:38:17 [2] hub.c: 3 ports detected
Jan 23 07:38:17 [1] PCI: Setting latency timer of device 00:02.1 to 64
Jan 23 07:38:17 [2] host/usb-ohci.c: USB OHCI at membase 0xf8833000, IRQ 21
Jan 23 07:38:17 [2] host/usb-ohci.c: usb-00:02.1, PCI device 10de:0067
Jan 23 07:38:17 [2] usb.c: new USB bus registered, assigned bus number 3
Jan 23 07:38:17 [2] hub.c: USB hub found
Jan 23 07:38:17 [2] hub.c: 3 ports detected
Jan 23 07:38:17 [2] usb.c: registered new driver usbkbd
Jan 23 07:38:17 [2] usbkbd.c: :USB HID Boot Protocol keyboard driver
Jan 23 07:38:17 [2] Initializing USB Mass Storage driver.
Jan 23 07:38:17 [2] usb.c: registered new driver usb-storage
Jan 23 07:38:17 [2] USB Mass Storage support registered.
Jan 23 07:38:17 [2] NET4: Linux TCP/IP 1.0 for NET4.0
Jan 23 07:38:17 [2] IP Protocols: ICMP, UDP, TCP
Jan 23 07:38:17 [2] IP: routing cache hash table of 16384 buckets, 128Kbytes
Jan 23 07:38:17 [2] TCP: Hash tables configured (established 262144 bind 65536)
Jan 23 07:38:17 [2] NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 23 07:38:17 [3] RAMDISK: NASLite file system found at block 0
Jan 23 07:38:17 [4] [truncated]
Jan 23 07:38:17 [4] VFS: Mounted root (ext2 filesystem).
Jan 23 07:38:17 [2] Mounted devfs on /dev
Jan 23 07:38:17 [2] Freeing unused kernel memory: 556k freed
Jan 23 07:38:17 [2] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Jan 23 07:38:17 [2] kjournald starting. Commit interval 5 seconds
Jan 23 07:38:17 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Jan 23 07:38:17 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 23 07:38:17 [2] kjournald starting. Commit interval 5 seconds
Jan 23 07:38:17 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
Jan 23 07:38:17 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 23 07:38:17 [2] kjournald starting. Commit interval 5 seconds
Jan 23 07:38:17 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,65), internal journal
Jan 23 07:38:17 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 23 07:38:17 [2] kjournald starting. Commit interval 5 seconds
Jan 23 07:38:17 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
Jan 23 07:38:17 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 23 07:38:17 [4] Unable to find swap-space signature

Is the Vista machine connecting to M2 via NFS? If so can you disable that and reboot to see if the swap will be rendered. The syslog does look a bit odd with random items missing.

Also try burning another CD but this time do it at the slowest speed for your CD burner. Try that next.

I have to say I'm puzzled by this.

Another thing - Ralph pointed this out...

Can you back out some of the RAM temporarily and run a test. I think we may be timing out. Try it with 512M or so and see if that works.

I took out one of the three DIMMs to take the memory down to 1GB and UPNP started up - there was quite a delay between DAAP and UPNP being displayed on startup so I guess the timeout theory was correct.

The swap space allocated was less - about 2gb. Web status shows swap in use.

I can see the UPNP service (using generic) in WMP11.

I'll keep the memory out for now until the issue is fixed in a later release.

Thanks for the help.

Good. Now that we know what is the cause, we'll address it before v1.01 is out.

Great many thanks for sticking through it.