I was running the latest version of CDD (having upgraded several times).
I'm running M2 now booted directly off the CD.
172.16.1.33 is in the DHCP range of my network - today it's my Vista box.
Today's startup syslog is below ...
System Message Log:
Jan 23 07:38:17 [3] klogd started: BusyBox v1.01 (2008.07.26-02:54+0000)
Jan 23 07:38:17 [2] 4K (64 bytes/line)
Jan 23 07:38:17 [2] CPU: L2 Cache: 256K (64 bytes/line)
Jan 23 07:38:17 [2] Intel machine check architecture supported.
Jan 23 07:38:17 [2] Intel machine check reporting enabled on CPU#0.
Jan 23 07:38:17 [1] CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
Jan 23 07:38:17 [1] CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Jan 23 07:38:17 [4] CPU: AMD Athlon(tm) XP 2000+ stepping 00
Jan 23 07:38:17 [2] Enabling fast FPU save and restore. done.
Jan 23 07:38:17 [2] Enabling unmasked SIMD FPU exception support. done.
Jan 23 07:38:17 [2] Checking 'hlt' instruction. OK.
Jan 23 07:38:17 [4] POSIX conformance testing by UNIFIX
Jan 23 07:38:17 [4] enabled ExtINT on CPU#0
Jan 23 07:38:17 [4] ESR value before enabling vector: 00000000
Jan 23 07:38:17 [4] ESR value after enabling vector: 00000000
Jan 23 07:38:17 [4] ENABLING IO-APIC IRQs
Jan 23 07:38:17 [1] init IO_APIC IRQs
Jan 23 07:38:17 [1] IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
Jan 23 07:38:17 [2] TIMER: vector=0x31 pin1=2 pin2=-1
Jan 23 07:38:17 [5] MP-BIOS bug: 8254 timer not connected to IO-APIC
Jan 23 07:38:17 [2] .trying to set up timer (IRQ0) through the 8259A . failed.
Jan 23 07:38:17 [2] .trying to set up timer as Virtual Wire IRQ. failed.
Jan 23 07:38:17 [2] .trying to set up timer as ExtINT IRQ. works.
Jan 23 07:38:17 [4] Using local APIC timer interrupts.
Jan 23 07:38:17 [4] calibrating APIC timer .
Jan 23 07:38:17 [4] . CPU clock speed is 1664.1724 MHz.
Jan 23 07:38:17 [4] . host bus clock speed is 266.2675 MHz.
Jan 23 07:38:17 [4] cpu: 0, clocks: 2662675, slice: 1331337
Jan 23 07:38:17 [4] CPU0
Jan 23 07:38:17 [4] mtrr: v1.40 (20010327) Richard Gooch (
rgooch@atnf.csiro.au)
Jan 23 07:38:17 [4] mtrr: detected mtrr type: Intel
Jan 23 07:38:17 [2] ACPI: Subsystem revision 20040326
Jan 23 07:38:17 [2] PCI: PCI BIOS revision 2.10 entry at 0xfbc60, last bus=2
Jan 23 07:38:17 [2] PCI: Using configuration type 1
Jan 23 07:38:17 [2] ACPI: Interpreter enabled
Jan 23 07:38:17 [2] ACPI: Using IOAPIC for interrupt routing
Jan 23 07:38:17 [2] ACPI: System [ACPI] (supports S0 S1 S4 S5)
Jan 23 07:38:17 [2] ACPI: PCI Root Bridge [PCI0] (00:00)
Jan 23 07:38:17 [4] PCI: Probing PCI hardware (bus 00)
Jan 23 07:38:17 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 23 07:38:17 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jan 23 07:38:17 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
Jan 23 07:38:17 [4] bled.
Jan 23 07:38:17 [2] PCI: Probing PCI hardware
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
Jan 23 07:38:17 [1] 00:00:01[A] -> 2-23 -> IRQ 23 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
Jan 23 07:38:17 [1] 00:00:02[A] -> 2-22 -> IRQ 22 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
Jan 23 07:38:17 [1] 00:00:02[B] -> 2-21 -> IRQ 21 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
Jan 23 07:38:17 [1] 00:00:02[C] -> 2-20 -> IRQ 20 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCI] enabled at IRQ 21
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCK] enabled at IRQ 22
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 22
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Jan 23 07:38:17 [1] 00:01:06[A] -> 2-18 -> IRQ 18 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Jan 23 07:38:17 [1] 00:01:06[B] -> 2-19 -> IRQ 19 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Jan 23 07:38:17 [1] 00:01:06[C] -> 2-16 -> IRQ 16 level high
Jan 23 07:38:17 [4] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
Jan 23 07:38:17 [1] 00:01:06[D] -> 2-17 -> IRQ 17 level high
Jan 23 07:38:17 [1] number of MP IRQ sources: 15.
Jan 23 07:38:17 [1] number of IO-APIC #2 registers: 24.
Jan 23 07:38:17 [2] testing the IO APIC.
Jan 23 07:38:17 [4]
Jan 23 07:38:17 [1] IO APIC #2
Jan 23 07:38:17 [1] register #00: 02000000
Jan 23 07:38:17 [1] . : physical APIC id: 02
Jan 23 07:38:17 [1] . : Delivery Type: 0
Jan 23 07:38:17 [1] . : LTS : 0
Jan 23 07:38:17 [1] register #01: 00170011
Jan 23 07:38:17 [1] . : max redirection entries: 0017
Jan 23 07:38:17 [1] . : PRQ implemented: 0
Jan 23 07:38:17 [1] . : IO APIC version: 0011
Jan 23 07:38:17 [1] register #02: 00000000
Jan 23 07:38:17 [1] . : arbitration: 00
Jan 23 07:38:17 [1] IRQ redirection table:
Jan 23 07:38:17 [1] NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Jan 23 07:38:17 [1] 00 000 00 1 0 0 0 0 0 0 00
Jan 23 07:38:17 [1] 01 001 01 0 0 0 0 0 1 1 39
Jan 23 07:38:17 [1] 02 000 00 1 0 0 0 0 0 0 00
Jan 23 07:38:17 [1] 03 001 01 0 0 0 0 0 1 1 41
Jan 23 07:38:17 [1] 04 001 01 0 0 0 0 0 1 1 49
Jan 23 07:38:17 [1] 05 001 01 0 0 0 0 0 1 1 51
Jan 23 07:38:17 [1] 06 001 01 0 0 0 0 0 1 1 59
Jan 23 07:38:17 [1] 07 001 01 1 0 0 0 0 1 1 61
Jan 23 07:38:17 [1] 08 001 01 0 0 0 0 0 1 1 69
Jan 23 07:38:17 [1] 09 001 01 0 1 0 0 0 1 1 71
Jan 23 07:38:17 [1] 0a 001 01 0 0 0 0 0 1 1 79
Jan 23 07:38:17 [1] 0b 001 01 0 0 0 0 0 1 1 81
Jan 23 07:38:17 [1] 0c 001 01 0 0 0 0 0 1 1 89
Jan 23 07:38:17 [1] 0d 001 01 0 0 0 0 0 1 1 91
Jan 23 07:38:17 [1] 0e 001 01 0 0 0 0 0 1 1 99
Jan 23 07:38:17 [1] 0f 001 01 0 0 0 0 0 1 1 A1
Jan 23 07:38:17 [1] 10 001 01 1 1 0 0 0 1 1 D9
Jan 23 07:38:17 [1] 11 001 01 1 1 0 0 0 1 1 E1
Jan 23 07:38:17 [1] 12 001 01 1 1 0 0 0 1 1 C9
Jan 23 07:38:17 [1] 13 001 01 1 1 0 0 0 1 1 D1
Jan 23 07:38:17 [1] 14 001 01 1 1 0 0 0 1 1 C1
Jan 23 07:38:17 [1] 15 001 01 1 1 0 0 0 1 1 B9
Jan 23 07:38:17 [1] 16 001 01 1 1 0 0 0 1 1 B1
Jan 23 07:38:17 [1] 17 001 01 1 1 0 0 0 1 1 A9
Jan 23 07:38:17 [1] IRQ to pin mappings:
Jan 23 07:38:17 [1] IRQ0 -> 0:2
Jan 23 07:38:17 [1] IRQ1 -> 0:1
Jan 23 07:38:17 [1] IRQ3 -> 0:3
Jan 23 07:38:17 [1] IRQ4 -> 0:4
Jan 23 07:38:17 [1] IRQ5 -> 0:5
Jan 23 07:38:17 [1] IRQ6 -> 0:6
Jan 23 07:38:17 [1] IRQ7 -> 0:7
Jan 23 07:38:17 [1] IRQ8 -> 0:8
Jan 23 07:38:17 [1] IRQ9 -> 0:9
Jan 23 07:38:17 [1] IRQ10 -> 0:10
Jan 23 07:38:17 [1] IRQ11 -> 0:11
Jan 23 07:38:17 [1] IRQ12 -> 0:12
Jan 23 07:38:17 [1] IRQ13 -> 0:13
Jan 23 07:38:17 [1] IRQ14 -> 0:14
Jan 23 07:38:17 [1] IRQ15 -> 0:15
Jan 23 07:38:17 [1] IRQ16 -> 0:16
Jan 23 07:38:17 [1] IRQ17 -> 0:17
Jan 23 07:38:17 [1] IRQ18 -> 0:18
Jan 23 07:38:17 [1] IRQ19 -> 0:19
Jan 23 07:38:17 [1] IRQ20 -> 0:20
Jan 23 07:38:17 [1] IRQ21 -> 0:21
Jan 23 07:38:17 [1] IRQ22 -> 0:22
Jan 23 07:38:17 [1] IRQ23 -> 0:23
Jan 23 07:38:17 [2] done.
Jan 23 07:38:17 [2] PCI: Using ACPI for IRQ routing
Jan 23 07:38:17 [2] Linux NET4.0 for Linux 2.4
Jan 23 07:38:17 [2] Based upon Swansea University Computer Society NET3.039
Jan 23 07:38:17 [4] Initializing RT netlink socket
Jan 23 07:38:17 [4] Starting kswapd
Jan 23 07:38:17 [4] allocated 32 pages and 32 bhs reserved for the highmem bounces
Jan 23 07:38:17 [2] Journalled Block Device driver loaded
Jan 23 07:38:17 [2] devfs: v1.12c (20020818) Richard Gooch (
rgooch@atnf.csiro.au)
Jan 23 07:38:17 [2] devfs: boot_options: 0x1
Jan 23 07:38:17 [2] Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
Jan 23 07:38:17 [2] ACPI: Power Button (FF) [PWRF]
Jan 23 07:38:17 [2] ACPI: Processor [CPU0] (supports C1)
Jan 23 07:38:17 [2] ACPI: Thermal Zone [THRM] (20 C)
Jan 23 07:38:17 [4] pty: 256 Unix98 ptys configured
Jan 23 07:38:17 [2] Real Time Clock Driver v1.10f
Jan 23 07:38:17 [2] Floppy drive(s): fd0 is 1.44M
Jan 23 07:38:17 [4] ut - AT keyboard not present?(ed)
Jan 23 07:38:17 [4] keyboard: Timeout - AT keyboard not present?(f4)
Jan 23 07:38:17 [2] FDC 0 is a post-1991 82077
Jan 23 07:38:17 [4] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Jan 23 07:38:17 [2] loop: loaded (max 8 devices)
Jan 23 07:38:17 [2] Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
Jan 23 07:38:17 [2] Copyright (c) 1999-2006 Intel Corporation.
Jan 23 07:38:17 [2] e1000: 01:09.0: e1000_probe: (PCI:33MHz:32-bit) 00:1b:21:0b:b9:08
Jan 23 07:38:17 [2] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Jan 23 07:38:17 [2] dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Jan 23 07:38:17 [4] FW Version=$Version$
Jan 23 07:38:17 [2] pcnet32.c:v1.30h 06.24.2004
tsbogend@alpha.franken.de Jan 23 07:38:17 [2] ThunderLAN driver v1.15
Jan 23 07:38:17 [2] TLAN: 0 devices installed, PCI: 0 EISA: 0
Jan 23 07:38:17 [2] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Jan 23 07:38:17 [2] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Jan 23 07:38:17 [4] sk98lin: No adapter found.
Jan 23 07:38:17 [2] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Jan 23 07:38:17 [2] Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Jan 23 07:38:17 [2] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 23 07:38:17 [2] NFORCE2: IDE controller at PCI slot 00:09.0
Jan 23 07:38:17 [2] NFORCE2: chipset revision 162
Jan 23 07:38:17 [2] NFORCE2: not 100% native mode: will probe irqs later
Jan 23 07:38:17 [4] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Jan 23 07:38:17 [4] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Jan 23 07:38:17 [2] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 23 07:38:17 [2] NFORCE2: 00:09.0 (rev a2) UDMA133 controller
Jan 23 07:38:17 [2] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Jan 23 07:38:17 [2] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Jan 23 07:38:17 [4] hda: Maxtor 6L300R0, ATA DISK drive
Jan 23 07:38:17 [4] hdb: Maxtor 6L250R0, ATA DISK drive
Jan 23 07:38:17 [4] hdc: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
Jan 23 07:38:17 [4] hdd: Maxtor 4R120L0, ATA DISK drive
Jan 23 07:38:17 [4] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 23 07:38:17 [4] ide1 at 0x170-0x177,0x376 on irq 15
Jan 23 07:38:17 [4] hda: attached ide-disk driver.
Jan 23 07:38:17 [4] hda: host protected area => 1
Jan 23 07:38:17 [2] hda: 586114704 sectors (300091 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(133)
Jan 23 07:38:17 [4] hdb: attached ide-disk driver.
Jan 23 07:38:17 [4] hdb: host protected area => 1
Jan 23 07:38:17 [2] hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(133)
Jan 23 07:38:17 [4] hdd: attached ide-disk driver.
Jan 23 07:38:17 [4] hdd: host protected area => 1
Jan 23 07:38:17 [2] hdd: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(133)
Jan 23 07:38:17 [4] hdc: attached ide-cdrom driver.
Jan 23 07:38:17 [2] hdc: ATAPI 16X DVD-ROM drive, 1725kB Cache
Jan 23 07:38:17 [2] Uniform CD-ROM driver Revision: 3.12
Jan 23 07:38:17 [2] Partition check:
Jan 23 07:38:17 [2] /dev/ide/host0/bus0/target0/lun0: p1
Jan 23 07:38:17 [2] /dev/ide/host0/bus0/target1/lun0: p1
Jan 23 07:38:17 [2] /dev/ide/host0/bus1/target1/lun0: p1
Jan 23 07:38:17 [2] SCSI subsystem driver Revision: 1.00
Jan 23 07:38:17 [2] Loading Adaptec I2O RAID: Version 2.4 Build 5
Jan 23 07:38:17 [2] Detecting Adaptec I2O RAID controllers.
Jan 23 07:38:17 [2] Red Hat/Adaptec aacraid driver (1.1-3 Jul 16 2008 21:50:42)
Jan 23 07:38:17 [4] scsi: Detection failed (no card)
Jan 23 07:38:17 [3] megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Jan 23 07:38:17 [4] GDT-HA: Storage RAID Controller Driver. Version: 3.04
Jan 23 07:38:17 [4] GDT-HA: Found 0 PCI Storage RAID Controllers
Jan 23 07:38:17 [2] scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Jan 23 07:38:17 [4] 3ware Storage Controller device driver for Linux v1.02.00.037.
Jan 23 07:38:17 [4] 3w-xxxx: No cards found.
Jan 23 07:38:17 [1] libata version 1.20 loaded.
Jan 23 07:38:17 [1] PCI(01:0b.0): version 0.9
Jan 23 07:38:17 [2] ata1: SATA max UDMA/100 cmd 0xF882D080 ctl 0xF882D08A bmdma 0xF882D000 irq 18
Jan 23 07:38:17 [2] ata2: SATA max UDMA/100 cmd 0xF882D0C0 ctl 0xF882D0CA bmdma 0xF882D008 irq 18
Jan 23 07:38:17 [1] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:007f
Jan 23 07:38:17 [2] ata1: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
Jan 23 07:38:17 [2] ata1: dev 0 configured for UDMA/100
Jan 23 07:38:17 [2] ata2: no device found (phy stat 00000000)
Jan 23 07:38:17 [2] scsi2 : sata_sil
Jan 23 07:38:17 [2] scsi3 : sata_sil
Jan 23 07:38:17 [4] Vendor: ATA Model: ST3500641AS Rev: 3.AA
Jan 23 07:38:17 [4] Type: Direct-Access ANSI SCSI revision: 05
Jan 23 07:38:17 [4] Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Jan 23 07:38:17 [4] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Jan 23 07:38:17 [2] /dev/scsi/host2/bus0/target0/lun0: p1
Jan 23 07:38:17 [2] raw1394: /dev/raw1394 device initialized
Jan 23 07:38:17 [2] sbp2: $Rev: 1074 $ Ben Collins
Jan 23 07:38:17 [5] (serialize_io = 1)
Jan 23 07:38:17 [2] usb.c: registered new driver usbdevfs
Jan 23 07:38:17 [2] usb.c: registered new driver hub
Jan 23 07:38:17 [1] PCI: Setting latency timer of device 00:02.2 to 64
Jan 23 07:38:17 [2] ehci_hcd 00:02.2: PCI device 10de:0068
Jan 23 07:38:17 [2] ehci_hcd 00:02.2: irq 20, pci mem f882f000
Jan 23 07:38:17 [2] usb.c: new USB bus registered, assigned bus number 1
Jan 23 07:38:17 [1] PCI: cache line size of 64 is not supported by device 00:02.2
Jan 23 07:38:17 [2] ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 23 07:38:17 [2] hub.c: USB hub found
Jan 23 07:38:17 [2] hub.c: 6 ports detected
Jan 23 07:38:17 [2] host/uhci.c: USB Universal Host Controller Interface driver v1.1
Jan 23 07:38:17 [1] PCI: Setting latency timer of device 00:02.0 to 64
Jan 23 07:38:17 [2] host/usb-ohci.c: USB OHCI at membase 0xf8831000, IRQ 22
Jan 23 07:38:17 [2] host/usb-ohci.c: usb-00:02.0, PCI device 10de:0067
Jan 23 07:38:17 [2] usb.c: new USB bus registered, assigned bus number 2
Jan 23 07:38:17 [2] hub.c: USB hub found
Jan 23 07:38:17 [2] hub.c: 3 ports detected
Jan 23 07:38:17 [1] PCI: Setting latency timer of device 00:02.1 to 64
Jan 23 07:38:17 [2] host/usb-ohci.c: USB OHCI at membase 0xf8833000, IRQ 21
Jan 23 07:38:17 [2] host/usb-ohci.c: usb-00:02.1, PCI device 10de:0067
Jan 23 07:38:17 [2] usb.c: new USB bus registered, assigned bus number 3
Jan 23 07:38:17 [2] hub.c: USB hub found
Jan 23 07:38:17 [2] hub.c: 3 ports detected
Jan 23 07:38:17 [2] usb.c: registered new driver usbkbd
Jan 23 07:38:17 [2] usbkbd.c: :USB HID Boot Protocol keyboard driver
Jan 23 07:38:17 [2] Initializing USB Mass Storage driver.
Jan 23 07:38:17 [2] usb.c: registered new driver usb-storage
Jan 23 07:38:17 [2] USB Mass Storage support registered.
Jan 23 07:38:17 [2] NET4: Linux TCP/IP 1.0 for NET4.0
Jan 23 07:38:17 [2] IP Protocols: ICMP, UDP, TCP
Jan 23 07:38:17 [2] IP: routing cache hash table of 16384 buckets, 128Kbytes
Jan 23 07:38:17 [2] TCP: Hash tables configured (established 262144 bind 65536)
Jan 23 07:38:17 [2] NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 23 07:38:17 [3] RAMDISK: NASLite file system found at block 0
Jan 23 07:38:17 [4] [truncated]
Jan 23 07:38:17 [4] VFS: Mounted root (ext2 filesystem).
Jan 23 07:38:17 [2] Mounted devfs on /dev
Jan 23 07:38:17 [2] Freeing unused kernel memory: 556k freed
Jan 23 07:38:17 [2] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Jan 23 07:38:17 [2] kjournald starting. Commit interval 5 seconds
Jan 23 07:38:17 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Jan 23 07:38:17 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 23 07:38:17 [2] kjournald starting. Commit interval 5 seconds
Jan 23 07:38:17 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
Jan 23 07:38:17 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 23 07:38:17 [2] kjournald starting. Commit interval 5 seconds
Jan 23 07:38:17 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,65), internal journal
Jan 23 07:38:17 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 23 07:38:17 [2] kjournald starting. Commit interval 5 seconds
Jan 23 07:38:17 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
Jan 23 07:38:17 [2] EXT3-fs: mounted filesystem with ordered data mode.
Jan 23 07:38:17 [4] Unable to find swap-space signature