I've had a my NASLite box for 7 months now and it's been great. I bought 3 refurbished Western Digital 250GB drives to use in it and I can't get them to configure.
When I try to configure them I get: "umount: /export/Disk-1: No such file or directory"
And of course:
Failed to configure Disk-1. Disk-1 can be configured only
if it is installed and is a fixed disk. CD-ROM, DVD-ROM, ZIP and other
ATAPI drives that are not fixed disks can not be configured for use
with NASLite.
In NasLite they show up as:
Disk-1 Hardware
WDC WD2500BB-55GUC0, ATA DISK drive
attached ide-disk driver.
host protected area => 1
488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(33)
NOTE: Disk-1 is installed and can be configured for use with NASLite-SMBG.
Things I've tried
I've ran the diagnostic utility from WD's site and they all pass the long test without any errors. I also did a low level format on them and that didn't help either.
I've tried the cables set on master/slave and also cable select. Neither helped. I even hooked up a single drive as master, it still wouldn't configure.
The drives are set to NONE in the BIOS.
Any ideas?
Thanks!
|