NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Sun Nov 28, 2021 9:31 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Hard Drive issues
PostPosted: Fri Mar 10, 2006 1:16 am 
Offline

Joined: Fri Jul 08, 2005 8:29 am
Posts: 30
I have 4 hard drives in my Nas PC. Drive 2 died recently so I swapped it out with a new hard drive.....

Issues:
Drive 4 reads the following
Disk-4 Initialization Messages

1. Checking for Disk-4
2. Found Disk-4 partition
3. Attempting to fix Disk-4 filesystem
4. Disk-4 filesystem is not mountable

Disk-4 Hardware

* Maxtor 5T020H2, ATA DISK drive
* attached ide-disk driver.
* host protected area => 1
* 39062500 sectors (20000 MB) w/2048KiB Cache, CHS=38752/16/63

NOTE: Disk-4 is installed and can be configured for use with NASLite-SMB.

I had a lot of data on here and am wondering why it reads this when it was configured and had data on it.....


Any Ideas....


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 10, 2006 12:01 pm 
Offline

Joined: Fri Jul 08, 2005 8:29 am
Posts: 30
OK so an update on the above....

I tried the drive on all other three IDE options and got the same error.

Then I came across this from another post:
http://www.fs-driver.org/screenshots.html

This worked like a charm.....copied data over to my windows PC for now.

Well I put the drive back in my Nas box and it worked fine now - I am confused and I am going to reformat it but glad there is some good info around here.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 10, 2006 4:27 pm 
Offline

Joined: Wed Jan 04, 2006 2:18 pm
Posts: 172
Location: North Carolina, USA
I had a similar problem when I accidentally shut the machine off without doing the shut down command :cry:

I copied the data over to a windows machine using rlinux and then put the disk back in NASLite and configured it, then copied the data back. No problems since.

Maybe you had a short power outage. I've since put my box on a UPS.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 13, 2006 4:12 am 
Offline

Joined: Sat Feb 19, 2005 7:39 pm
Posts: 21
Location: Brisbane, Australia
i also suffered a drive loss (thou mine happened while doing controlled shutdowns for swaping in a new bigger drive)

i actually used the repair feature built into naslite, it reported heaps of errors and lost blocks, but i don't seem to have lost anything off the drive

(ps Tony it needs an auto repair option or repair all, as pressing y a couple of hundred time was a pita)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group