NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Mon Dec 06, 2021 6:02 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sat Jul 09, 2005 6:49 am 
Offline

Joined: Sat Jul 09, 2005 6:37 am
Posts: 3
Hello,

I've just installed NaseLite-SMB on a Pentium II 233MHz with 128MB RAM and a 8GByte HD just for testing purpose.

Later I want to build ab a system with 4 x 250GByte.

Furthermore I've a Windows XP system with SP2 installed.

Now I've the following problem.

I can map the NaseLite disc to a drive letter on the XP system. Also I can browse to the disc using the Explorer. As far as good no problem.

But if I copy a couple of files it starts copying the files and after some time it hangs up an an error message occures that the network drive is no longer available.

The NaseLite SMB Log contains the follwing entries:


-- Log File ---
[2005/07/09 09:44:08, 1] smbd/server.c:main(641)
smbd version 2.0.10 started.
Copyright Andrew Tridgell 1992-1998
[2005/07/09 10:10:10, 1] smbd/service.c:make_connection(550)
obelix (192.168.6.10) connect to service Disk-1 as user NAS-User (uid=98, gid=98) (pid 1011)
[2005/07/09 10:10:12, 0] smbd/nttrans.c:call_nt_transact_ioctl(2516)
call_nt_transact_ioctl: Currently not implemented.
[2005/07/09 10:11:56, 1] smbd/service.c:close_cnum(583)
obelix (192.168.6.10) closed connection to service Disk-1
[2005/07/09 10:11:56, 1] smbd/service.c:make_connection(550)
obelix (192.168.6.10) connect to service Disk-1 as user NAS-User (uid=98, gid=98) (pid 1012)
[2005/07/09 10:14:13, 1] smbd/service.c:close_cnum(583)
obelix (192.168.6.10) closed connection to service Disk-1
[2005/07/09 10:14:13, 1] smbd/service.c:make_connection(550)
obelix (192.168.6.10) connect to service Disk-1 as user NAS-User (uid=98, gid=98) (pid 1013)
[2005/07/09 10:14:30, 0] smbd/nttrans.c:call_nt_transact_ioctl(2516)
call_nt_transact_ioctl: Currently not implemented.
[2005/07/09 10:18:12, 1] smbd/service.c:close_cnum(583)
obelix (192.168.6.10) closed connection to service Disk-1
[2005/07/09 10:18:12, 1] smbd/service.c:make_connection(550)
obelix (192.168.6.10) connect to service Disk-1 as user NAS-User (uid=98, gid=98) (pid 1142)
[2005/07/09 10:43:23, 0] smbd/nttrans.c:call_nt_transact_ioctl(2516)
call_nt_transact_ioctl: Currently not implemented.
[2005/07/09 10:44:55, 0] lib/util_sock.c:read_socket_data(477)
read_socket_data: recv failure for 4. Error = Connection reset by peer
[2005/07/09 10:44:55, 1] smbd/service.c:close_cnum(583)
obelix (192.168.6.10) closed connection to service Disk-1
[2005/07/09 10:44:55, 1] smbd/service.c:make_connection(550)
obelix (192.168.6.10) connect to service Disk-1 as user NAS-User (uid=98, gid=98) (pid 1783)
-- Log File ---

Someone an idea what's going wrong?

Thanks,

Gerald


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 09, 2005 7:02 am 
Offline

Joined: Sun Feb 27, 2005 11:08 am
Posts: 225
try mapping the drive by IP address and not NetBIOS name and report back.

;)


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 09, 2005 11:30 am 
Offline

Joined: Sat Jun 18, 2005 12:39 pm
Posts: 13
fat wrote:
try mapping the drive by IP address and not NetBIOS name and report back.

;)


I still haven't work out how to do that :(


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 09, 2005 1:49 pm 
Offline

Joined: Sun Feb 27, 2005 11:08 am
Posts: 225
say your ip address is 192.168.0.1 and the name the box is NAS

start run

\\NAS\

goes to that box

but so does

\\192.168.0.1\

:)


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 09, 2005 2:48 pm 
Offline

Joined: Sat Jun 18, 2005 12:39 pm
Posts: 13
Thanks


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 09, 2005 2:53 pm 
Offline

Joined: Sat Jun 18, 2005 12:39 pm
Posts: 13
Just crashed again :(

I set up some new shortcuts, using the ip (\\192.168.0.10\disk-1 etc...)

Still got a crash when moving big files.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 09, 2005 4:43 pm 
Offline

Joined: Sun Feb 27, 2005 11:08 am
Posts: 225
hmm its obviously not that then.

I suspect the dev team would be best suited to help now


Top
 Profile  
 
 Post subject: Solved
PostPosted: Sun Jul 10, 2005 8:01 am 
Offline

Joined: Sat Jul 09, 2005 6:37 am
Posts: 3
Hello,

so I've figured out the problem.

A network card was the problem. Nothing to do with the NASLite. Seems that the network card does have problems with auto negotiation. In the past this wasn't detected because the computer was used for internet only and the LAN card wasn't used for huge data transfers.

I've installed an other LAN card and now all works fine.

Thanks,

Gerald


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 10, 2005 8:55 am 
Offline

Joined: Sat Jun 18, 2005 12:39 pm
Posts: 13
I'd better dig out another LAN card then :(


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 10, 2005 10:00 pm 
Offline

Joined: Fri Jul 08, 2005 8:29 am
Posts: 30
I had problems with the Onboard 3com nics on old dell. I swapped that out with a Dlink I had laying around and things were alot better.

Chad


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 19, 2005 8:56 am 
Offline

Joined: Fri Aug 06, 2004 5:27 am
Posts: 48
Location: Franfurt am Main, Germany
Hy,

I also think there was a problem with the NIC
On my Terabyteserverworks an old 3COM Nic. All works fine.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group