NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Mon Nov 29, 2021 10:14 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Fri Dec 03, 2010 2:49 am 
Offline

Joined: Tue Jul 05, 2005 9:50 pm
Posts: 46
Location: Jacksonville, Florida
Today, I restarted my Windoze machine, then went to open a textfile I have shortcutted to my desktop... and got an error from Windows saying something about not accessed in a timely basis. I went and opened Disk-1 from the desktop, and it loaded... but Windows then showed a green fuel-gauge sort of effect moving left to right across the directory-path field of the windows explorer window, as if it was taking awhile longer than normal to refresh its memory of what was on there. But I was then able to load that textfile like normal.

A few moments later, I heard a quick series of different-pitched tones coming, more than likely, from the NAS. After this, I went over to the NAS and looked, and saw that the disk activity light was going on and off in little bursts.

I went to the web-page on the NAS, checked the page for Disk-1, and saw this:

Code:
Disk-1 Initialization Messages

   1. Checking for Disk-1
   2. Found Disk-1 partition
   3. Attempting to fix Disk-1 filesystem
   4. Attempting to mount Disk-1 filesystem
   5. Disk-1 filesystem mounted successfully

Disk-1 Hardware

    * WDC WD3200JB-00KFA0, ATA DISK drive
    * attached ide-disk driver.
    * host protected area => 1
    * 625142448 sectors (320073 MB) w/8192KiB Cache, CHS=38913/255/63
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * status timeout: status=0xd0 { Busy }
    * drive not ready for command
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * irq timeout: status=0xd0 { Busy }
    * status timeout: status=0xd0 { Busy }
    * drive not ready for command

NOTE: Disk-1 is installed and available for use.

Disk-1 S.M.A.R.T. Status

smartctl version 5.0-45 Copyright (C) 2002 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD3200JB-00KFA0                     
Serial Number:    WD-WCAMR3920133
Firmware Version: 08.05J08
ATA Version is:   6
ATA Standard is:  Unrecognized. Minor revision code: 0x00
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Off-line data collection status: (0x00)   Offline data collection activity was
               never started.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete off-line
data collection:        (9600) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Automatic timer ON/OFF support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 116) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE     WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail     -       9
  3 Spin_Up_Time            0x0003   193   184   021    Pre-fail     -       5325
  4 Start_Stop_Count        0x0032   100   100   000    Old_age      -       97
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail     -       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail     -       8
  9 Power_On_Hours          0x0032   062   062   000    Old_age      -       28216
 10 Spin_Retry_Count        0x0013   100   253   051    Pre-fail     -       0
 11 Calibration_Retry_Count 0x0012   100   253   051    Old_age      -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age      -       96
194 Temperature_Celsius     0x0022   102   099   000    Old_age      -       48
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age      -       0
197 Current_Pending_Sector  0x0012   199   199   000    Old_age      -       80
198 Offline_Uncorrectable   0x0010   100   253   000    Old_age      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age      -       0
200 Unknown_Attribute       0x0009   200   200   051    Pre-fail     -       0

SMART Self-test log, version number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended off-line   Completed                     00%     27838         
# 2  Extended off-line   Completed                     00%     25737         
# 3  Extended off-line   Completed                     00%     25182         
# 4  Extended off-line   Completed                     00%     24462         
# 5  Extended off-line   Completed                     00%     22108         
# 6  Extended off-line   Completed                     00%     20957         
# 7  Extended off-line   Completed                     00%     19811         
# 8  Extended off-line   Completed                     00%     19591         
# 9  Extended off-line   Completed                     00%     19224         
#10  Extended off-line   Completed                     00%     18335         
#11  Extended off-line   Completed                     00%     18324         
#12  Extended off-line   Completed                     00%     17832         
#13  Extended off-line   Completed                     00%     17076         
#14  Extended off-line   Completed                     00%     14511         
#15  Extended off-line   Completed                     00%     13560         
#16  Extended off-line   Completed                     00%     11915         
#17  Extended off-line   Completed                     00%     11838         
#18  Extended off-line   Completed                     00%     11828         
#19  Extended off-line   Completed                     00%     11231         
#20  Extended off-line   Completed                     00%     10726         
#21  Extended off-line   Completed                     00%     10710         


I have not made any changes to my NAS hardware in ages, and I haven't restarted it in awhile, either. What could this mean? Should I be worried?

Disk-2, in contrast, says this:

Code:
Disk-2 Initialization Messages

   1. Checking for Disk-2
   2. Found Disk-2 partition
   3. Attempting to fix Disk-2 filesystem
   4. Attempting to mount Disk-2 filesystem
   5. Disk-2 filesystem mounted successfully

Disk-2 Hardware

    * ST3250823A, ATA DISK drive
    * attached ide-disk driver.
    * host protected area => 1
    * 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63

NOTE: Disk-2 is installed and available for use.

Disk-2 S.M.A.R.T. Status

smartctl version 5.0-45 Copyright (C) 2002 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST3250823A                             
Serial Number:    3ND0XYXB
Firmware Version: 3.06   
ATA Version is:   7
ATA Standard is:  Unrecognized. Minor revision code: 0x00
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Off-line data collection status: (0x02)   Offline data collection activity
               completed without error.
Self-test execution status:      ( 119)   The previous self-test completed having
               the read element of the test failed.
Total time to complete off-line
data collection:        ( 430) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Automatic timer ON/OFF support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     (  84) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE     WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   051   039   006    Pre-fail     -       116657769
  3 Spin_Up_Time            0x0003   099   098   000    Pre-fail     -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age      -       62
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail     -       29
  7 Seek_Error_Rate         0x000f   088   060   030    Pre-fail     -       713346542
  9 Power_On_Hours          0x0032   066   066   000    Old_age      -       30063
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail     -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age      -       65
194 Temperature_Celsius     0x0022   050   053   000    Old_age      -       50 (Lifetime Min/Max 0/23)
195 Hardware_ECC_Recovered  0x001a   049   045   000    Old_age      -       76448074
197 Current_Pending_Sector  0x0012   100   100   000    Old_age      -       4
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age      -       4
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age      -       0
200 Unknown_Attribute       0x0000   100   253   000    Old_age      -       0
202 Unknown_Attribute       0x0032   099   252   000    Old_age      -       1

SMART Self-test log, version number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended off-line   Completed: read failure       70%     29663         0x079a1cb1
# 2  Extended off-line   Completed: read failure       70%     27621         0x079a1cb1
# 3  Extended off-line   Completed: read failure       70%     27075         0x079a1cb1
# 4  Extended off-line   Completed: read failure       70%     26365         0x079a1cb1
# 5  Extended off-line   Completed                     00%     21699         
# 6  Extended off-line   Completed                     00%     20565         
# 7  Extended off-line   Completed                     00%     19438         
# 8  Extended off-line   Completed                     00%     18046         
# 9  Extended off-line   Completed                     00%     17685         
#10  Extended off-line   Completed                     00%     16810         
#11  Extended off-line   Completed                     00%     16799         
#12  Extended off-line   Completed                     00%     16314         
#13  Extended off-line   Completed                     00%     15570         
#14  Extended off-line   Completed                     00%     13045         
#15  Extended off-line   Completed                     00%     12108         
#16  Extended off-line   Completed                     00%     10489         
#17  Extended off-line   Completed                     00%     10412         
#18  Extended off-line   Completed                     00%     10402         
#19  Extended off-line   Aborted by host               90%     10401         
#20  Extended off-line   Completed                     00%      9815         
#21  Extended off-line   Completed                     00%      9317         



Top
 Profile  
 
PostPosted: Fri Dec 03, 2010 2:11 pm 
Offline

Joined: Sat Nov 19, 2005 6:39 pm
Posts: 633
Location: California
Several comments and a few questions.

1. Upgrade to NL 2 (you posted in the NL1 section).
2. Temps are high 48/50. Get those drives down to 40 or lower.
3. What is doing the Extended Offline Tests so frequently ? Are you doing those manually ?
4. Make sure you have backups of important data.

Disk 2 read test has failed (a long time ago (almost 4k hours ago)). It appears Disk 1 is not the only one with a potential problem.

Restart NL and observe carefully on the console the progress of startup. It should be doing file system checks. If it does not, start the file check manually for each disk after NL boots.


Top
 Profile  
 
PostPosted: Mon Dec 06, 2010 1:37 pm 
Offline

Joined: Tue Jul 05, 2005 9:50 pm
Posts: 46
Location: Jacksonville, Florida
Two questions:

Would offline tests be something Windows is doing, or is offline tests something that's done internally to the NAS? I ask because I had to set one of the folders on Disk-1 to Always available offline because that was the only way to get it accepted when I added that folder to the Windows Music library.

Are you telling me Disk-1, and to some extent Disk-2, are going bad? Do I need to transfer all that material onto new drives?


Top
 Profile  
 
PostPosted: Mon Dec 06, 2010 2:05 pm 
Offline

Joined: Sat Nov 19, 2005 6:39 pm
Posts: 633
Location: California
Windows could have been doing tests ... but I don't think it would be forcing the EXTENDED test so frequently. So that's a little odd; but I could be wrong, and windows performed those tests because of inconsistencies it encountered.

(Side comment: were these drives ever attached to a Windows PC ? Windows -- as a client to NAS -- can NOT perform these tests.)

From your experience you should have some idea whether these drives were ever used on windows PC. NASLite will not perform extended offline tests all by itself. Even manually invoking extended file system checks are NOT the same thing as what's being reported in the Test Section of the SMART information. So .. how long (# running hours) have these drives been attached to NASLite ?

The "available offline" (Windows client) feature and "offline test" (SMART firmware) are not related.

The "irq" errors may be caused by something other than a dying or flaky drive, but you will need to step thru a process of elimination to find the source of the problem. Start with drive cables.

If it was my data ... yes, I'd offload it now. New drives are cheap. Or at minimum I'd immediately follow all my recommendations in my prior post.

Hope this helps. Any one else with comments to add to this ?


Top
 Profile  
 
PostPosted: Mon Dec 06, 2010 3:03 pm 
Offline

Joined: Tue Jul 05, 2005 9:50 pm
Posts: 46
Location: Jacksonville, Florida
These drives have never been on a Windows PC. Well, one of them was a refurbished drive, but it was totally formatted by NASlite when I originally put it in several years ago. The NAS has been running in the form it is now unchanged for years and years. I have not opened the machine or anything since probably the middle of the 00s or so, probably not since I replaced that drive way back when. Actually, now that I think about it, I moved all the drives into a better machine some point after I replaced that drive (better processor, more ram)... but haven't really touched it much since, and that was years ago.

Would NAS2 have better repair functionality in it related to this issue? Say, where I could check everything I might need to know about an issue like may be going on here without having to plug a monitor and keyboard into the machine and watch what it says at startup?


Top
 Profile  
 
PostPosted: Wed Dec 22, 2010 4:40 am 
Offline

Joined: Tue Jul 05, 2005 9:50 pm
Posts: 46
Location: Jacksonville, Florida
Okay, what does it mean when... on VERY rare occasions, the NAS plays four higher-pitched beeps followed by four lower-pitched beeps? Or maybe it's 5 higher-pitched followed by 5 lower-pitched. In any event, it just suddenly, out of the blue, does this sound... and then I don't hear a peep out of it again like that, even once, for days and DAYS.

I see in the PDF manual that if the NAS detects an approaching failure of the hard drive, it will generate a 5-beep audible alarm every 5 minutes. Well, I'm not hearing anything of that sort. Not every five minutes, anyway.

So, why would it be be doing this? What does it mean?


Top
 Profile  
 
PostPosted: Wed Dec 22, 2010 10:19 am 
Offline

Joined: Sat Nov 19, 2005 6:39 pm
Posts: 633
Location: California
That's a question developers Tony or Ralph need to answer. It's still possible there's some flaky hardware in your case. Sorry I had not further followed up. Curiously no one else wanted to chime in either, though.

1. Have you lowered the temperatures of the drives yet ?
2. Got backups ?
3. Try a Linux Live-CD to run the SMART tests manually ? ("smartctl")
4. Upgrade to NL-2 ?

Since this is apparently purely a NAS machine running NL1 for the past 10 or 20,000 hours I am still puzzled by what is doing the extended offline tests. I don't believe NL1 does those by itself. Have there been any additional ones past the latest ones you reported ?

The irq errors could go away if you go thru a process of elimination to find the cause (reseat cables, RAM, PCI card (if you use any), etc). Whether the irq errors cause the beeps, I don't know.


Top
 Profile  
 
PostPosted: Sun Dec 26, 2010 4:59 pm 
Offline

Joined: Tue Jul 05, 2005 9:50 pm
Posts: 46
Location: Jacksonville, Florida
Well, today, I went to load a large textfile off Disk-2, and the end part of it was gone. I restarted the machine, figuring it was some sort of file table issue that might self-correct itself..... but now I see:

Code:
   1. Checking for Disk-2
   2. Found Disk-2 partition
   3. Attempting to fix Disk-2 filesystem
   4. Disk-2 filesystem is not mountable

Disk-2 Hardware

    * ST3250823A, ATA DISK drive
    * attached ide-disk driver.
    * host protected area => 1
    * 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
    * irq timeout: status=0xd0 { Busy }

NOTE: Disk-2 is installed and can be configured for use with NASLite-SMB.


This was after the machine went for several hours on the restart.

I still see disk activity going on, tho. Lots of it. I quick google on "naslite filesystem is not mountable" took me to a thread here saying to either use one of the for-purchase versions of NASLite, or use a linux repair process from a live CD. I've done the latter before, ages ago (before I moved to a better machine with more ram in it).

I suppose I could restart the machine again and see if this time it restores things and mounts the drive... but I don't want to do that while there's disk activity. I don't know why there IS disk activity, since I'm not at the moment reading or writing to the disk from Windows. It might be trying to do it's offline-mode stuff, though, making a local copy of the stuff in my extensive Music folder on Disk-1, which last I checked (though, honestly, that was days ago) it hadn't fully completed that process. Maybe I should go uncheck Offline Mode on that folder... :-/

I've been reluctant to move the machine to where I can connect a monitor and keyboard to it, though... because I'd have to MOVE a buncha stuff out of the way in order to move the machine.

I HAD copied a WHOLE bunch of files over there to Disk-2 yesterday, a few gigs of smaller files (none of the individual files where near that large, but collectively they came to a couple of gigs) and it went by without issue... other than a few instances where Windoze complained that the filename was too long to fit into the destination directory.


Top
 Profile  
 
PostPosted: Mon Dec 27, 2010 3:16 am 
Offline

Joined: Sun May 27, 2007 5:38 pm
Posts: 517
Location: gods own country
neither drive is enormous 320 and 250 gig if google is correct - not read the whole thread so dont know if you have more drives in there - maybe not using the free version

but how much memory have you got in the machine - thats the first thing i would look at if a drive is not finishing the file check or hanging

put as much as you can in - it will do no harm and may well solve the problem


Top
 Profile  
 
PostPosted: Sat Jan 22, 2011 4:58 pm 
Offline

Joined: Tue Jul 05, 2005 9:50 pm
Posts: 46
Location: Jacksonville, Florida
Okay, this is weird. It was making 3 higher pitched beeps, and then 4 lower pitched beeps, repeating in regular intervals. The PDF manual says a 5-beep warning every 5 minutes indicates an approaching failure, but it doesn't say what sort of beeps, and there's nothing in there to indicate what 3 beeps followed by 4 beeps means. This was with the disk activity light constantly on.

On the other hand, looking at all the web pages at my NAS (the About, System, Disk-1 through Disk-4, SYS Log, and so on), the data was clearly being truncated on all of them, so that only the very top of the text info was coming up, often cut off in mid-word. It wasn't like that a few days ago. oO

I finally resorted to restarting the machine, and.... this time it brought Disk-2 up fine, but didn't make Disk-1 available! Before, it was the reverse of that. I'm not getting the beep tones now, though.

This is what I'm seeing for Disk-1:

Code:
Disk-1 Initialization Messages

   1. Checking for Disk-1
   2. Found Disk-1 partition
   3. Attempting to fix Disk-1 filesystem
   4. Disk-1 filesystem is not mountable

Disk-1 Hardware

    * WDC WD3200JB-00KFA0, ATA DISK drive
    * attached ide-disk driver.
    * host protected area => 1
    * 625142448 sectors (320073 MB) w/8192KiB Cache, CHS=38913/255/63

NOTE: Disk-1 is installed and can be configured for use with NASLite-SMB.



This is what I'm getting for Disk-2:

Code:
Disk-2 Initialization Messages

   1. Checking for Disk-2
   2. Found Disk-2 partition
   3. Verified Disk-2 filesystem
   4. Attempting to mount Disk-2 filesystem
   5. Disk-2 filesystem mounted successfully

Disk-2 Hardware

    * ST3250823A, ATA DISK drive
    * attached ide-disk driver.
    * host protected area => 1
    * 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63

NOTE: Disk-2 is installed and available for use.

Disk-2 S.M.A.R.T. Status

smartctl version 5.0-45 Copyright (C) 2002 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST3250823A                             
Serial Number:    3ND0XYXB
Firmware Version: 3.06   
ATA Version is:   7
ATA Standard is:  Unrecognized. Minor revision code: 0x00
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Off-line data collection status: (0x02)   Offline data collection activity
               completed without error.
Self-test execution status:      ( 249)   Self-test routine in progress...
               90% of test remaining.
Total time to complete off-line
data collection:        ( 430) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Automatic timer ON/OFF support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     (  84) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE     WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   048   039   006    Pre-fail     -       74908943
  3 Spin_Up_Time            0x0003   099   098   000    Pre-fail     -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age      -       64
  5 Reallocated_Sector_Ct   0x0033   098   098   036    Pre-fail     -       85
  7 Seek_Error_Rate         0x000f   088   060   030    Pre-fail     -       802009071
  9 Power_On_Hours          0x0032   065   065   000    Old_age      -       31258
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail     -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age      -       67
194 Temperature_Celsius     0x0022   048   053   000    Old_age      -       48 (Lifetime Min/Max 0/23)
195 Hardware_ECC_Recovered  0x001a   051   045   000    Old_age      -       133552244
197 Current_Pending_Sector  0x0012   100   100   000    Old_age      -       4
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age      -       4
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age      -       0
200 Unknown_Attribute       0x0000   100   253   000    Old_age      -       0
202 Unknown_Attribute       0x0032   097   250   000    Old_age      -       3

SMART Self-test log, version number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended off-line   Completed: read failure       70%     29663         0x079a1cb1
# 2  Extended off-line   Completed: read failure       70%     27621         0x079a1cb1
# 3  Extended off-line   Completed: read failure       70%     27075         0x079a1cb1
# 4  Extended off-line   Completed: read failure       70%     26365         0x079a1cb1
# 5  Extended off-line   Completed                     00%     21699         
# 6  Extended off-line   Completed                     00%     20565         
# 7  Extended off-line   Completed                     00%     19438         
# 8  Extended off-line   Completed                     00%     18046         
# 9  Extended off-line   Completed                     00%     17685         
#10  Extended off-line   Completed                     00%     16810         
#11  Extended off-line   Completed                     00%     16799         
#12  Extended off-line   Completed                     00%     16314         
#13  Extended off-line   Completed                     00%     15570         
#14  Extended off-line   Completed                     00%     13045         
#15  Extended off-line   Completed                     00%     12108         
#16  Extended off-line   Completed                     00%     10489         
#17  Extended off-line   Completed                     00%     10412         
#18  Extended off-line   Completed                     00%     10402         
#19  Extended off-line   Aborted by host               90%     10401         
#20  Extended off-line   Completed                     00%      9815         
#21  Extended off-line   Test in progress              90%     31258         




This is what Server Log says:

Code:
Server System Log

    * Jan 22 23:17:36 NASLite-SMB syslog.info syslogd started: BusyBox v1.00-pre10 (2004.06.01-20:52+0000)
    * Jan 22 23:17:36 NASLite-SMB daemon.info init: Starting pid 260, console /dev/null: '/sbin/klogd'
    * Jan 22 23:17:36 NASLite-SMB syslog.notice klogd: klogd started: BusyBox v1.00-pre10 (2004.06.01-20:52+0000)
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: Linux version 2.4.26.NASLite (root@(none)) (gcc version 3.3.2) #10 Mon Jun 14 14:07:53 MDT 2004
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: BIOS-provided physical RAM map:
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: BIOS-e820: 0000000000100000 - 00000000040fd800 (usable)
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: BIOS-e820: 00000000040fd800 - 00000000040ff800 (ACPI data)
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: BIOS-e820: 00000000040ffc00 - 0000000008000000 (usable)
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
    * Jan 22 23:17:36 NASLite-SMB user.notice klogd: 128MB LOWMEM available.
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: On node 0 totalpages: 32768
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: zone(0): 4096 pages.
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: zone(1): 28672 pages.
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: zone(2): 0 pages.
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: Kernel command line:
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Initializing CPU#0
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: Detected 447.699 MHz processor.
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: Console: colour VGA+ 80x25
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: Calibrating delay loop... 891.28 BogoMIPS
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Memory: 127500k/131072k available (1044k kernel code, 3172k reserved, 281k data, 232k init, 0k highmem)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: CPU: L1 I cache: 16K, L1 D cache: 16K
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: CPU: L2 cache: 512K
    * Jan 22 23:17:36 NASLite-SMB user.debug klogd: CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
    * Jan 22 23:17:36 NASLite-SMB user.debug klogd: CPU: Common caps: 0183f9ff 00000000 00000000 00000000
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: CPU: Intel Pentium II (Deschutes) stepping 02
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Enabling fast FPU save and restore... done.
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Checking 'hlt' instruction... OK.
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Checking for popad bug... OK.
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: POSIX conformance testing by UNIFIX
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: PCI: PCI BIOS revision 2.10 entry at 0xfd983, last bus=1
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: PCI: Using configuration type 1
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: PCI: Probing PCI hardware
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: PCI: Probing PCI hardware (bus 00)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Limiting direct PCI/PCI transfers.
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Linux NET4.0 for Linux 2.4
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Based upon Swansea University Computer Society NET3.039
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: Initializing RT netlink socket
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: Starting kswapd
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: devfs: boot_options: 0x1
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: pty: 256 Unix98 ptys configured
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Real Time Clock Driver v1.10f
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Floppy drive(s): fd0 is 1.44M
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: keyboard: Timeout - AT keyboard not present?(ed)
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: keyboard: Timeout - AT keyboard not present?(f4)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: FDC 0 is a post-1991 82077
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: loop: loaded (max 8 devices)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: FW Version=$Version$
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: pcnet32.c:v1.28 02.20.2004 tsbogend@alpha.franken.de
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: ThunderLAN driver v1.15
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: TLAN: 0 devices installed, PCI: 0 EISA: 0
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25.
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: 8139too Fast Ethernet driver 0.9.26
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: PCI: Found IRQ 11 for device 00:0e.0
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: PCI: Sharing IRQ 11 with 00:0c.0
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: PCI: Sharing IRQ 11 with 01:00.0
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: eth0: RealTek RTL8139 at 0xc8800000, 00:0d:88:2d:3a:b4, IRQ 11
    * Jan 22 23:17:36 NASLite-SMB user.debug klogd: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: WDC WD3200JB-00KFA0, ATA DISK drive
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hdb: ST3250823A, ATA DISK drive
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hdc: MATSHITADVD-ROM SR-8582, ATAPI CD/DVD-ROM drive
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: ide1 at 0x170-0x177,0x376 on irq 15
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: attached ide-disk driver.
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: host protected area => 1
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: hda: 625142448 sectors (320073 MB) w/8192KiB Cache, CHS=38913/255/63
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hdb: attached ide-disk driver.
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hdb: host protected area => 1
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Partition check:
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: /dev/ide/host0/bus0/target0/lun0: p1
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: /dev/ide/host0/bus0/target1/lun0: p1
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: NET4: Linux TCP/IP 1.0 for NET4.0
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: IP Protocols: ICMP, UDP, TCP
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: IP: routing cache hash table of 1024 buckets, 8Kbytes
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: >TCP: Hash tables configured (established 8192 bind 16384)
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    * Jan 22 23:17:36 NASLite-SMB user.notice klogd: RAMDISK: Compressed image found at block 803
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: EXT2-fs warning: checktime reached, running e2fsck is recommended
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: VFS: Mounted root (ext2 filesystem).
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Mounted devfs on /dev
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: Freeing unused kernel memory: 232k freed
    * Jan 22 23:17:36 NASLite-SMB user.info klogd: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: status=0x41 { DriveReady Error }
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: error=0x04 { DriveStatusError }
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: status=0x41 { DriveReady Error }
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: error=0x04 { DriveStatusError }
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: status=0x41 { DriveReady Error }
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: error=0x04 { DriveStatusError }
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=4213511, high=0, low=4213511, sector=4213448
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: end_request: I/O error, dev 03:01 (hda), sector 4213448
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: status=0x41 { DriveReady Error }
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: error=0x04 { DriveStatusError }
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=1599391, high=0, low=1599391, sector=1599328
    * Jan 22 23:17:36 NASLite-SMB user.warn klogd: end_request: I/O error, dev 03:01 (hda), sector 1599328


addendum:

BTW, I'm getting a clicking sound from the machine. It was doing that before, today, too. Six slow clicks, a pause, six slow clicks, a pause.... I'm guessing that means I'm going to need to replace one of the drives, but which one? When I was trying to read Disk-1 from over the LAN lately, it was giving huge fits... showing as offline half the time, then coming accessible again a bit later, before going offline again, so I guess that means Disk-1 needs to be replaced.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group