I have checked all cables etc and all are fitted and working correctly to the best of my knowledge. Here is a list of my hardware from the naslite log I use telnet to access the control panel etc of the naslite however i cannot get access when it crashes to view any messages.
Quote:
Processor (CPU)
vendor_id : AuthenticAMD
model name : AMD Duron(tm) Processor
cpu MHz : 701.263
cache size : 64 KB
bogomips : 1399.19
Memory
total used free shared buffers
Mem: 192572 189224 3348 0 1392
Disks
Filesystem Size Used Available Use% Device
System 3.9M 2.4M 1.5M 61% RAM Disk
Storage Area 275.1G 96.1G 179.0G 35% NAS Disk-2
Network Interface
RealTek RTL8139 at 0xcc800000, 00:e0:4c:65:02:6d, IRQ 10
Identified 8139 chip type 'RTL-8139C'
link up, 100Mbps, full-duplex, lpa 0x41E1
Link encap:Ethernet HWaddr 00:E0:4C:65:02:6D
inet addr:192.168.1.222 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9213555 errors:485 dropped:6105 overruns:447 frame:0
TX packets:7810069 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1033197389 (985.3 MiB) TX bytes:2215676256 (2.0 GiB)
Interrupt:10
Also thanks for the help it is much appreciated