NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Tue Apr 23, 2024 4:06 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Wed Jul 21, 2004 12:45 am 
Offline

Joined: Wed Jul 21, 2004 12:40 am
Posts: 4
I just started using NAS-Lite on a Pentium 90 with 24MB ram and a Maxtor 120GB 8MB buffer drive. I have now experienced, twice in two days, apparent corruption because Disk 2 (no disk 1 installed) shows that it can't be mounted according to the Disk 2 HTML page.

Any suggestions?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 21, 2004 8:46 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
I would assume that you did configure Disk-2 before rebooting, rebooted and were able to read and write to Disk-2 from a client machine. I would also assume that you shut the machine down and on reboot Disk-2 mount failed. If those assumptions are correct, then the problem is most likely hardware related. Personally, i'll try NASLite and the same drive in another machine and see if the problem persists.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 23, 2004 6:31 pm 
Offline

Joined: Wed Jul 21, 2004 12:40 am
Posts: 4
Tony,

As you suggested offline that it could be low memory or bad hardware, I tried more memory w/o success and then changed to another PC (P166) and everything seems fine.


Thanks


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group